fixed commetn from songxiao
This commit is contained in:
ykcheungab
@@ -46,6 +46,9 @@
|
||||
"stop": "Cancel acquisition",
|
||||
"preview": "Preview / Stop preview",
|
||||
"reset": "Reset tracker",
|
||||
"reset_view": "Reset views",
|
||||
"reset_view_tip": "Put the chart window, cursor and 3D camera back to their defaults (F8). Touches neither the device nor the zero estimate.",
|
||||
"pause": "Pause / resume (F7)",
|
||||
"help": "Help",
|
||||
"about": "About"
|
||||
},
|
||||
@@ -53,14 +56,22 @@
|
||||
"plot_settings_title": "Plot settings",
|
||||
"plot_window": "Time window",
|
||||
"plot_window_tip": "Force plot time window (seconds)",
|
||||
"plot_fn_min": "FN min",
|
||||
"plot_fn_min_tip": "Normal-force axis minimum (Newton mode). It may be negative: leaving room below zero keeps the idle curve off the FX frame and makes small presses visible",
|
||||
"plot_fn_max": "FN max",
|
||||
"plot_fn_max_tip": "Normal force axis max (Newton mode)",
|
||||
"plot_shear_max": "Shear max",
|
||||
"plot_shear_max_tip": "Shear force axis ±max for FX/FY (Newton mode)",
|
||||
"plot_fn_raw_min": "FN raw min",
|
||||
"plot_fn_raw_min_tip": "Normal-force axis minimum in raw (uncalibrated) mode; may be negative",
|
||||
"plot_fn_raw_max": "FN raw max",
|
||||
"plot_fn_raw_max_tip": "Normal-force axis max in raw (uncalibrated) mode. 0 = auto range on the data; the default is sized so idle jitter is invisible in the plot",
|
||||
"plot_shear_raw_max": "Shear raw max",
|
||||
"plot_shear_raw_max_tip": "Shear-force axis ±max for FX/FY in raw (uncalibrated) mode. 0 = auto range",
|
||||
"plot_deadband_n": "Zero threshold (N)",
|
||||
"plot_deadband_n_tip": "Display deadband floor in Newton mode: a reading inside the threshold shows as 0 and the curve flattens on the zero line. 0 = auto (the noise estimated from the quiet startup window; Newton mode has no fixed floor). Display only — the record and forces.csv keep the measured values",
|
||||
"plot_deadband_raw": "Zero threshold (raw)",
|
||||
"plot_deadband_raw_tip": "Display deadband floor in raw mode (raw counts). 0 = auto (the built-in 50-count floor). Raise it by hand when the calibration data is suspect; display only",
|
||||
"reset_defaults": "Reset to defaults",
|
||||
"plot_filters": "Filters (applied while acquiring; screen and record agree)",
|
||||
"filter_preset": "Preset",
|
||||
@@ -115,6 +126,13 @@
|
||||
"playback_needs_recording": "This video has no recording beside it (no forces.csv): replay needs a recording; to just watch the video use View ▸ Recompute forces from the video",
|
||||
"playback_video_only": "Play this video (no recording beside it: the picture plays, the force charts are empty)",
|
||||
"reset": "Reset",
|
||||
"reset_tip": "Zero the device tracker. This affects the zero point only, never the view — to put the views back use View → Reset views.",
|
||||
"pause": "⏸ Pause",
|
||||
"pause_resume": "▶",
|
||||
"pause_tip": "Pause the computation and the display (F7): no flow, depth or contact is computed, the picture holds its last frame, and the device stays connected for an immediate resume. A recording that spans a pause has a gap.",
|
||||
"resume_tip": "Resume the computation and the display (F7), from the newest frame.",
|
||||
"resume_label": "▶ Resume",
|
||||
"resume_label_tip": "Resume the computation and the display (F7): it carries on from the newest frame with the device still connected.",
|
||||
"stop_playback": "Stop",
|
||||
"stop_playback_tip": "Stop the replay: plain playback and a “recompute from the video” pass both stop here (Esc does the same).",
|
||||
"stopped": "Stopped: {what}",
|
||||
@@ -400,6 +418,9 @@
|
||||
"camera_disconnected": "Camera disconnected",
|
||||
"reset_ok": "Tracker reset",
|
||||
"reset_pending": "Zeroing requested; waiting for the acquisition thread to confirm…",
|
||||
"view_reset": "Views reset",
|
||||
"paused": "Paused: nothing is computed, the device stays connected",
|
||||
"resumed": "Resumed",
|
||||
"finger_run_unavailable": "Run is not available for this sensor type",
|
||||
"video_required": "Select a video file first",
|
||||
"config_missing": "Sensor config not found for {type}",
|
||||
|
||||
@@ -46,6 +46,9 @@
|
||||
"stop": "取消采集",
|
||||
"preview": "预览 / 停止预览",
|
||||
"reset": "重置追踪器",
|
||||
"reset_view": "复位视图",
|
||||
"reset_view_tip": "把曲线窗口、游标与三维视角恢复为默认（F8）。不改动设备，也不清除零点估计。",
|
||||
"pause": "暂停 / 继续（F7）",
|
||||
"help": "帮助",
|
||||
"about": "关于"
|
||||
},
|
||||
@@ -53,14 +56,22 @@
|
||||
"plot_settings_title": "绘图设置",
|
||||
"plot_window": "时间窗口",
|
||||
"plot_window_tip": "力曲线时间窗口（秒）",
|
||||
"plot_fn_min": "FN 下限",
|
||||
"plot_fn_min_tip": "法向力纵轴下限（牛顿模式）。可以是负数：留出零点以下的空间，静止曲线不会压在 FX 框线上，小压力也更清楚",
|
||||
"plot_fn_max": "FN 上限",
|
||||
"plot_fn_max_tip": "法向力纵轴上限（牛顿模式）",
|
||||
"plot_shear_max": "剪切上限",
|
||||
"plot_shear_max_tip": "剪切力 FX/FY 纵轴 ±上限（牛顿模式）",
|
||||
"plot_fn_raw_min": "FN 原始下限",
|
||||
"plot_fn_raw_min_tip": "未标定（原始）模式下的法向力纵轴下限，可为负",
|
||||
"plot_fn_raw_max": "FN 原始上限",
|
||||
"plot_fn_raw_max_tip": "未标定（原始）模式下的法向力纵轴上限。0 = 按数据自动量程；默认值按实测峰值设定，使静止时的抖动在图中不可见",
|
||||
"plot_shear_raw_max": "原始剪切上限",
|
||||
"plot_shear_raw_max_tip": "未标定（原始）模式下的剪切力 FX/FY 纵轴 ±上限。0 = 自动量程",
|
||||
"plot_deadband_n": "归零阈值（N）",
|
||||
"plot_deadband_n_tip": "牛顿模式下的显示死区下限：读数在阈值内即显示为 0，曲线压平在零线上。0 = 自动（用启动静默窗口估计的噪声，牛顿模式无固定下限）。只影响显示，记录与 forces.csv 仍是实测值",
|
||||
"plot_deadband_raw": "归零阈值（原始）",
|
||||
"plot_deadband_raw_tip": "原始模式下的显示死区下限（原始计数）。0 = 自动（默认下限 50 计数）。标定数据可疑时可手动放大，只影响显示",
|
||||
"reset_defaults": "恢复默认",
|
||||
"plot_filters": "滤波（作用于采集，界面与记录同步）",
|
||||
"filter_preset": "预设",
|
||||
@@ -107,7 +118,7 @@
|
||||
"run_unavailable": "当前不可运行",
|
||||
"run_disabled_video": "请先选择一个视频文件",
|
||||
"run_disabled_sensor": "此传感器类型暂不支持运行",
|
||||
"playback": "▶ 回放",
|
||||
"playback": "▶ 播放",
|
||||
"playback_pause": "⏸ 暂停",
|
||||
"playback_tip": "按 1× 播放这段录制（空格键同效）；拖动游标即暂停",
|
||||
"playback_pause_tip": "暂停播放（拖动游标、框选或滚轮也会暂停）",
|
||||
@@ -115,6 +126,13 @@
|
||||
"playback_needs_recording": "这段视频旁边没有记录（缺 forces.csv）：回放需要一条记录；只想看视频请用 视图 ▸ 从视频重算力值",
|
||||
"playback_video_only": "播放这段视频（没有配套记录：可以看画面，力曲线为空）",
|
||||
"reset": "重置",
|
||||
"reset_tip": "把设备追踪器归零（清零）。只影响零点，不动界面；想恢复视图请用「视图 → 复位视图」。",
|
||||
"pause": "⏸ 暂停",
|
||||
"pause_resume": "▶",
|
||||
"pause_tip": "暂停计算与显示（F7）：不再做光流/深度/接触计算，画面停在最后一帧，设备保持连接，随时可继续。跨过暂停的记录会有一段空档。",
|
||||
"resume_tip": "继续计算与显示（F7），从最新一帧接着跑。",
|
||||
"resume_label": "▶ 继续",
|
||||
"resume_label_tip": "继续计算与显示（F7）：从最新一帧接着跑，设备保持连接。",
|
||||
"stop_playback": "停止",
|
||||
"stop_playback_tip": "停止回放：无论是普通播放还是「从视频重算」通道，都在这里停下（Esc 同效）。",
|
||||
"stopped": "已停止：{what}",
|
||||
@@ -400,6 +418,9 @@
|
||||
"camera_disconnected": "摄像机已断开",
|
||||
"reset_ok": "追踪器已重置",
|
||||
"reset_pending": "已请求归零，等待采集线程确认…",
|
||||
"view_reset": "视图已复位",
|
||||
"paused": "已暂停：不再计算，设备保持连接",
|
||||
"resumed": "已继续",
|
||||
"finger_run_unavailable": "此传感器类型暂不支持运行",
|
||||
"video_required": "请先选择视频文件",
|
||||
"config_missing": "未找到传感器配置: {type}",
|
||||
|
||||
@@ -15,17 +15,21 @@
|
||||
"scene3d_display": {
|
||||
"deform_enabled": false,
|
||||
"display_gain": 0.0,
|
||||
"housing_visible": true,
|
||||
"housing_visible": false,
|
||||
"max_fps": 30
|
||||
},
|
||||
"sensor_type": "box",
|
||||
"config_name": "",
|
||||
"units": "newton",
|
||||
"plot_window_sec": 4.0,
|
||||
"plot_fn_min": 0.0,
|
||||
"plot_fn_max": 20.0,
|
||||
"plot_shear_max": 20.0,
|
||||
"plot_fn_raw_min": 0.0,
|
||||
"plot_fn_raw_max": 1000000.0,
|
||||
"plot_shear_raw_max": 500000.0,
|
||||
"plot_deadband_n": 0.0,
|
||||
"plot_deadband_raw": 0.0,
|
||||
"image_view_mode": "arrows_pure",
|
||||
"arrow_rotation_deg": 90,
|
||||
"settings_expanded": false,
|
||||
|
||||
@@ -0,0 +1,44 @@
|
||||
{
|
||||
"name": "mems-prototype",
|
||||
"version": "1.0",
|
||||
"camera": {
|
||||
"resolution_raw": [1920, 1080],
|
||||
"fps": 30,
|
||||
"units": 15,
|
||||
"units_used": 9,
|
||||
"resolution_stitch": [365, 365],
|
||||
"stitch_res_list": [365, 263, 123, 63]
|
||||
},
|
||||
"stitcher": {
|
||||
"min_area_frac": 0.01,
|
||||
"max_area_frac": 0.05,
|
||||
"max_aspect_ratio": 50,
|
||||
"index": [1, 2, 3, 6, 7, 8, 11, 12, 13],
|
||||
"margin": 10,
|
||||
"nominal_ov_pos": 100,
|
||||
"n": [3, 3],
|
||||
"row_tol": 0.6,
|
||||
"box_size": [250, 250],
|
||||
"blend": "numba",
|
||||
"blend_list": ["numpy", "numba", "none"]
|
||||
},
|
||||
"tracker": {
|
||||
"adaptive": true,
|
||||
"lower_threshold": 12.0,
|
||||
"upper_threshold": 18.0,
|
||||
"loop_closure_interval": 1,
|
||||
"algorithm": "dis",
|
||||
"dis_preset": "medium",
|
||||
"dis_mode": 3,
|
||||
"algorithm_list": ["raft", "dis"],
|
||||
"hhd_downsample": 3
|
||||
},
|
||||
"contact": {
|
||||
"min_contour_area": 3000,
|
||||
"flow_threshold": 5,
|
||||
"div_threshold": 0.05,
|
||||
"expansion_threshold": 0.01,
|
||||
"kernel_size": [5, 5],
|
||||
"denoise_sigma": 12
|
||||
}
|
||||
}
|
||||
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
@@ -6,7 +6,7 @@
|
||||
"resolution_raw": [1280, 720],
|
||||
"fps": 30,
|
||||
"resolution_stitch": [280, 300],
|
||||
"source_scale": 0.4,
|
||||
"source_scale": 0.42,
|
||||
"old":[672, 728, 1,0.5],
|
||||
"work": [504, 546,1],
|
||||
"work2": [420, 450,0.8],
|
||||
|
||||
Reference in New Issue
Block a user