Fix repeat ownership and close out capture evidence

Start each repeat after its own manifest entry, refuse packets from a restarted
or stopped camera, keep a simulated repeat from reading as recorded evidence,
and decide completeness from the writer report. Add the operator summary (four
files plus an atomic pointer) and read-only video review of a hold window.

Verified with the full Autocal suite (567 passed), the shared recorder/playback
files (57 passed), the lint gate and the documentation gate; the two pre-existing
panel_check layout failures also fail on a clean HEAD worktree.

apps/autocal/config/locales/en_US.json

@@ -392,7 +392,22 @@
     "col_levels": "Levels (N)",
     "col_hold": "Hold (s)",
     "col_repeats": "Repeats",
-    "col_done": "Done"
+    "col_done": "Done",
+    "capture": "Recording: {status} · {frames} frames · {dropped} dropped · {reason}",
+    "capture_idle": "Not ready",
+    "capture_recording": "Recording",
+    "capture_closing": "Closing",
+    "capture_complete": "Complete",
+    "capture_incomplete": "Evidence incomplete",
+    "capture_reason_restarted": "image source restarted",
+    "capture_reason_zero_frames": "no frame was written",
+    "capture_reason_write_error": "disk write failed",
+    "capture_reason_video_missing": "no video frame was kept",
+    "capture_reason_video_undecodable": "the video cannot be decoded",
+    "capture_reason_dropped": "frames were dropped",
+    "capture_reason_segments": "unexpected number of video segments",
+    "capture_reason_timeout": "closing timed out",
+    "capture_wait": "recording is not ready; the hold cannot be confirmed yet"
   },
   "finger": {
     "title": "Finger calibration-point debug",
@@ -589,6 +604,7 @@
   "overview": {
     "capture_in_progress": "In progress",
     "saved": "Analysis saved; hover for its location.",
+    "saved_summary": "Review saved and summary published: {path} → {summary}",
     "open_session": "Open calibration session…",
     "empty": "Choose the session folder containing session.json to view collected sites, normal response and sensitivity. You can also open current data from Calibration capture.",
     "title": "Calibration record overview",
@@ -654,7 +670,8 @@
     "guide_missing": "1 Check identity → 2 Select site / trial → 3 Check stable windows → 4 Save\nNext: this site has no attempt; choose a collected site or acquire it.",
     "guide_incomplete": "1 Check identity → 2 Select site / trial → 3 Check stable windows → 4 Save\nNext: inspect the stop reason and recorded signal. Incomplete attempts are excluded from fitting.",
     "guide_check": "1 Check identity → 2 Select site / trial → 3 Check stable windows → 4 Save\nNext: select a trial and Check hold windows; adjust the time interval if needed.",
-    "guide_save": "1 Check identity → 2 Select site / trial → 3 Check stable windows → 4 Save\nNext: inspect remaining holds or save current analysis."
+    "guide_save": "1 Check identity → 2 Select site / trial → 3 Check stable windows → 4 Save\nNext: inspect remaining holds or save current analysis.",
+    "video": "View recording"
   },
   "quality": {
     "open": "Repeatability and validation…",
@@ -724,6 +741,7 @@
     "uv_title": "Site sensitivity: blue→red {low:.4g}→{high:.4g} raw/N; grey has no fit",
     "issues": "{count} incomplete attempts excluded from fitting. Inspect raw signals for stability.",
     "saved": "Saved new review: {path}",
+    "saved_summary": "Review saved and summary published: {path} → {summary}",
     "col_trial": "Trial",
     "col_branch": "Phase",
     "col_load": "Reference (N)",
@@ -733,5 +751,35 @@
     "col_duration": "Hold (s)",
     "col_quality": "Quality",
     "col_drift": "Drift (raw/s)"
+  },
+  "video": {
+    "title": "Video review",
+    "header": "{trial} · step {step} ({branch} {load} N) · review {status} · {samples} valid samples",
+    "position": "Frame {index}/{total} · id {frame} · segment {segment} frame {segment_frame} · basis {basis}",
+    "play": "Play",
+    "pause": "Pause",
+    "previous": "Previous",
+    "next": "Next",
+    "frame_missing": "This frame was not written to the video (dropped from the queue)",
+    "reason_missing": "Cannot open the video: {detail}",
+    "reason_no_frame_source": "This recording has no usable video evidence (no camera, or no frame was written)",
+    "reason_no_video_frame": "No valid frame of this hold was written to the video",
+    "reason_trial_not_found": "This trial is not in the record",
+    "reason_window_not_found": "This hold window is not in the trial",
+    "reason_video_undecodable": "The video file cannot be decoded",
+    "reason_decode": "Decoding this frame failed",
+    "cursor": "Current frame",
+    "reference": "Actual reference",
+    "curve_title": "Raw force curve for this hold",
+    "basis_unknown": "not recorded",
+    "open": "View recording"
+  },
+  "summary": {
+    "failed": "Summary export failed: {detail}. The recording is unchanged; you can retry.",
+    "published": "Summary published: {path}",
+    "retry": "Publish summary again",
+    "done": "Summary published again: {path}",
+    "reason_hold_not_found": "This hold attempt is not in the record",
+    "reason_hold_not_complete": "This hold attempt was discarded by a remeasure"
   }
 }

apps/autocal/config/locales/zh_CN.json

@@ -392,7 +392,22 @@
     "col_levels": "档位 (N)",
     "col_hold": "保持 (s)",
     "col_repeats": "重复",
-    "col_done": "完成"
+    "col_done": "完成",
+    "capture": "录像：{status} · 帧 {frames} · 丢帧 {dropped} · {reason}",
+    "capture_idle": "未就绪",
+    "capture_recording": "录制中",
+    "capture_closing": "收尾中",
+    "capture_complete": "完整",
+    "capture_incomplete": "证据不完整",
+    "capture_reason_restarted": "图像来源已重启",
+    "capture_reason_zero_frames": "没有写入任何帧",
+    "capture_reason_write_error": "写盘失败",
+    "capture_reason_video_missing": "没有录像帧",
+    "capture_reason_video_undecodable": "录像无法解码",
+    "capture_reason_dropped": "队列丢帧",
+    "capture_reason_segments": "录像分段数不符",
+    "capture_reason_timeout": "收尾超时",
+    "capture_wait": "录像未就绪，暂时不能确认保持"
   },
   "finger": {
     "title": "手指标定点调试",
@@ -589,6 +604,7 @@
   "overview": {
     "capture_in_progress": "采集中",
     "saved": "分析结果已保存；保存位置见提示。",
+    "saved_summary": "已保存复核并发布汇总：{path} → {summary}",
     "open_session": "打开标定会话…",
     "empty": "请选择包含 session.json 的会话文件夹，查看已采集测点、法向响应和灵敏度；也可从标定采集页打开本场数据。",
     "title": "标定记录总览",
@@ -654,7 +670,8 @@
     "guide_missing": "① 核对身份 → ② 选测点／试验 → ③ 检查稳定段 → ④ 保存\n下一步：此点尚未采集，请选择已采点或安排补采。",
     "guide_incomplete": "① 核对身份 → ② 选测点／试验 → ③ 检查稳定段 → ④ 保存\n下一步：查看结束原因及已录曲线，决定补采；未完成试验不参与拟合。",
     "guide_check": "① 核对身份 → ② 选测点／试验 → ③ 检查稳定段 → ④ 保存\n下一步：选择单次试验，点击“检查保持段…”；必要时调整时间区间。",
-    "guide_save": "① 核对身份 → ② 选测点／试验 → ③ 检查稳定段 → ④ 保存\n下一步：继续检查剩余保持段，或保存当前分析结果。"
+    "guide_save": "① 核对身份 → ② 选测点／试验 → ③ 检查稳定段 → ④ 保存\n下一步：继续检查剩余保持段，或保存当前分析结果。",
+    "video": "查看录像"
   },
   "quality": {
     "open": "重复性与验证…",
@@ -724,6 +741,7 @@
     "uv_title": "测点初步灵敏度：蓝→红 {low:.4g}→{high:.4g} raw/N；灰色无拟合",
     "issues": "{count} 次未完成试验不参与拟合；请按原始曲线检查稳定性。",
     "saved": "已另存：{path}",
+    "saved_summary": "已保存复核并发布汇总：{path} → {summary}",
     "col_trial": "试验",
     "col_branch": "阶段",
     "col_load": "参考力 (N)",
@@ -733,5 +751,35 @@
     "col_duration": "保持 (s)",
     "col_quality": "质量说明",
     "col_drift": "漂移 (raw/s)"
+  },
+  "video": {
+    "title": "录像复核",
+    "header": "{trial} · 第 {step} 步（{branch} {load} N）· 复核状态 {status} · 有效样本 {samples}",
+    "position": "第 {index}/{total} 帧 · 帧号 {frame} · 分段 {segment} 第 {segment_frame} 帧 · 时间基准 {basis}",
+    "play": "播放",
+    "pause": "暂停",
+    "previous": "上一帧",
+    "next": "下一帧",
+    "frame_missing": "该帧没有写入录像（队列丢帧）",
+    "reason_missing": "无法打开录像：{detail}",
+    "reason_no_frame_source": "这段录像没有可用的视频证据（未接相机或没有写入帧）",
+    "reason_no_video_frame": "该保持窗口内没有已写入视频的有效帧",
+    "reason_trial_not_found": "记录中找不到这次试验",
+    "reason_window_not_found": "在该试验中找不到这个保持窗口",
+    "reason_video_undecodable": "录像文件无法解码",
+    "reason_decode": "解码这一帧失败",
+    "cursor": "当前帧",
+    "reference": "实际参考",
+    "curve_title": "原始力曲线与该保持窗口",
+    "basis_unknown": "未记录",
+    "open": "查看录像"
+  },
+  "summary": {
+    "failed": "汇总导出失败：{detail}。采集结果没有改变，可以重试。",
+    "published": "汇总已发布：{path}",
+    "retry": "重新导出汇总",
+    "done": "汇总已重新发布：{path}",
+    "reason_hold_not_found": "记录中找不到这个保持尝试",
+    "reason_hold_not_complete": "这个保持尝试已被重测废弃，没有可复核的画面"
   }
 }