autocal: 测试序列页与几何与安装页共用 2D 平面图和 3D 预览

- FingerPanel 新增 release_views/restore_views，把表面选点图和三维预览
  整体借出，不复制，已拾取的点、传感器包和 GL 视图仍是同一份状态
- SequencePanel 用共用视图替换“仿真阶段实现”的占位框（adopt_views/release_views）
- 主窗口按当前标签页把两个视图挂到序列页或几何页
- 新增 tests/test_shared_views.py
- 序列页借用视图时给两个框固定最小高度并隐藏长图例，修复 3D 视图下按钮与勾选框叠压

apps/autocal/src/orisys_autocal/ui/sensor_panel.py

@@ -261,6 +261,9 @@ class FingerPanel(QGroupBox):
 
         body = QHBoxLayout()
         body.setSpacing(10)
+        self._body = body
+        #: True while the 2D picker and 3D preview are shown on the sequence page.
+        self._views_lent = False
         picker_box = self._build_picker()
         readout_box = self._build_readouts()
         preview_box = self._build_preview()
@@ -279,6 +282,44 @@ class FingerPanel(QGroupBox):
         self.set_tool_xy(*tool_xy_mm)
         self.retranslate()
 
+    # ------------------------------------------------------------- shared views
+
+    def release_views(self) -> tuple[QWidget, QWidget]:
+        """Hand the 2D picker and the 3D preview to another page.
+
+        The sequence page needs the same two views, and a widget has one parent, so
+        they are *moved* rather than copied: one picked point, one bundle and one GL
+        context stay the single source of truth. Whoever takes them must give them
+        back through :meth:`restore_views`.
+        """
+        if not self._views_lent:
+            self._body.removeWidget(self._picker_box)
+            self._body.removeWidget(self._preview_box)
+            self._views_lent = True
+            # Short on height elsewhere, the colour key goes to the tooltip only.
+            self.legend_label.setVisible(False)
+        return self._picker_box, self._preview_box
+
+    def restore_views(self) -> None:
+        """Put the two views back in this page, after the readouts between them."""
+        if not self._views_lent:
+            return
+        self._body.insertWidget(0, self._picker_box, 2)
+        self._body.insertWidget(2, self._preview_box, 6)
+        self.legend_label.setVisible(True)
+        for box in (self._picker_box, self._preview_box):
+            layout = box.layout()
+            if layout is not None:
+                layout.invalidate()
+                layout.activate()
+        self._picker_box.show()
+        self._preview_box.show()
+        self._views_lent = False
+
+    @property
+    def views_lent(self) -> bool:
+        return self._views_lent
+
     # ------------------------------------------------------------------ widgets
 
     def _build_toolbar(self, bundle_path: str) -> QWidget:

apps/autocal/src/orisys_autocal/ui/sequence_panel.py

@@ -117,6 +117,9 @@ VALIDATION_CHECKS: tuple[tuple[str, str], ...] = (
     ("contact_confirmable", "sequence.check_contact"),
 )
 
+#: Height the shared 2D and 3D boxes get on this page, in pixels.
+SHARED_VIEW_MIN_HEIGHT = 420
+
 #: Placeholder rows, so the flow shows its shape. Marked as unmeasured: a row
 #: with no status is a design, not a measurement.
 _EXAMPLE_POINTS: tuple[tuple[float, float, float], ...] = (
@@ -164,6 +167,8 @@ class SequencePanel(QGroupBox):
         self._check_rows: dict[str, QLabel] = {}
         self._summary: dict[str, Any] = {}
         self._dirty = False
+        #: The 2D picker and 3D preview, while the geometry page has lent them.
+        self._views: tuple[QWidget, QWidget] | None = None
 
         outer = QVBoxLayout(self)
         outer.setContentsMargins(10, 8, 10, 10)
@@ -267,6 +272,13 @@ class SequencePanel(QGroupBox):
         self.preview_label.setAlignment(Qt.AlignmentFlag.AlignCenter)
         column.addWidget(self.preview_label, 1)
 
+        # The geometry page's two views are shown here while this page is open:
+        # a sequence is designed against the surface and the pose, not a table.
+        self._view_row = QHBoxLayout()
+        self._view_row.setContentsMargins(0, 0, 0, 0)
+        self._view_row.setSpacing(8)
+        column.addLayout(self._view_row, 1)
+
         self.preview_hint = QLabel(box)
         self.preview_hint.setObjectName("hintLabel")
         self.preview_hint.setWordWrap(True)
@@ -274,6 +286,47 @@ class SequencePanel(QGroupBox):
         self._preview_box = box
         return box
 
+    def adopt_views(self, picker: QWidget, preview: QWidget) -> None:
+        """Show the shared 2D picker and 3D preview in place of the placeholder."""
+        if self._views is not None:
+            return
+        self._views = (picker, preview)
+        self.preview_label.setVisible(False)
+        # An explicit floor. Left to its contents the box was allotted less height
+        # than its rows (a 3D view that will not shrink below 240, check boxes,
+        # buttons) need, and the layout then drew them on top of each other.
+        for widget in (picker, preview):
+            widget.setMinimumHeight(SHARED_VIEW_MIN_HEIGHT)
+        self._view_row.addWidget(picker, 2)
+        self._view_row.addWidget(preview, 3)
+        picker.show()
+        preview.show()
+        self._relayout(preview)
+
+    def release_views(self) -> bool:
+        """Stop showing the shared views; the caller puts them back where they live."""
+        if self._views is None:
+            return False
+        for widget in self._views:
+            self._view_row.removeWidget(widget)
+            widget.setMinimumHeight(0)
+        self._views = None
+        self.preview_label.setVisible(True)
+        return True
+
+    @staticmethod
+    def _relayout(widget: QWidget) -> None:
+        """Recompute a moved widget's inner layout for its new size."""
+        layout = widget.layout()
+        if layout is not None:
+            layout.invalidate()
+            layout.activate()
+        widget.updateGeometry()
+
+    @property
+    def has_views(self) -> bool:
+        return self._views is not None
+
     # --------------------------------------------------------------- validation
 
     def _build_validation(self) -> QWidget:

apps/autocal/src/orisys_autocal/ui/window.py

@@ -328,6 +328,9 @@ class AutoCalMainWindow(QMainWindow):
             sensor_panel=self.calibration_panel,
         )
         self.calibration_panel.reviewRequested.connect(self._on_review_records)
+        # The geometry page's 2D and 3D views are also the sequence page's.
+        self.workspace.pageChanged.connect(self._place_shared_views)
+        self._place_shared_views(self.workspace.current_key())
 
         self.main_splitter = QSplitter(Qt.Orientation.Horizontal, body)
         self.main_splitter.addWidget(self.left_rail)
@@ -405,6 +408,18 @@ class AutoCalMainWindow(QMainWindow):
 
     # ----------------------------------------------------------- device setup
 
+    def _place_shared_views(self, key: str) -> None:
+        """Show the surface picker and 3D preview on whichever of the two pages is open.
+
+        One set of widgets, so a point picked on either page, the loaded bundle and
+        the simulation are the same state; only the parent changes with the tab.
+        """
+        if key == "sequence":
+            picker, preview = self.finger_panel.release_views()
+            self.sequence_panel.adopt_views(picker, preview)
+        elif self.sequence_panel.release_views() or self.finger_panel.views_lent:
+            self.finger_panel.restore_views()
+
     def _show_device_setup(self, tab: str | None = None) -> None:
         """Open the connection/bus dialog, optionally on one of its tabs."""
         self.device_setup.open_for(tab)