refactor(studio-2d): 二维图像单一后端 —— 视图模式由帧内容决定，四条路径共用一个渲染入口

- What:
  1. 新增 `shared/.../acquisition/image_backend.py`（纯 NumPy，无 Qt）：`ImageFrame`（底图 + flow/depth/
     valid_mask + source/frame_id/t_rel_s/stale）、`ImagePlan`、`plan_image()`、`render_image()`，以及模式
     常量（`arrows_pure`/`arrows_stitched`/`depth`/`recorded`）与来源常量（live/recompute/replay/preview）。
     `plan_image()` 分两个问题回答：**可选项**由来源决定（live/recompute = 三种派生视图；录像/摄像头预览
     = 只有 `recorded`），**这一帧能不能画**由 `missing` 说明（某帧缺 flow/depth 不会悄悄改掉操作者选的
     视图，而是在页脚写一行）。`render_image()` 是唯一渲染入口：内部复用 `draw_arrow_display`/
     `depth_map_to_bgr`/`flow_colormap`（公共签名不变），深度图**改用主题色带**（与面板色条同一张表——
     原来窗口没传 colormap，深度图走 OpenCV JET 而色条画品牌色带，图例与图片两张表）。
  2. `ui/arrow_panel.py`：新增 `bgr_to_qimage()`（全应用唯一一份 BGR→QImage，`app_window._bgr_to_qimage`
     成为它的别名、`replay.py` 的重复实现删除）；新增 `set_plan(plan)`/`plan_modes()`——模式集来自 plan，
     `view_modes()` 在无 plan 时回退旧的预设式列表（`set_source_kind` 保留"命名/文案"职责，并支持
     `recompute` 状态与 `panels.recompute_pipeline`）；页脚新增一行 `note_label` 说明 plan（如
     "录像只保存原始相机图像…"），箭头放大/有效区注解改由"本帧是否支持箭头视图"决定；
     `set_view_mode()` 与 `_populate_view_combo()` 按当前模式集校验（不再只认三个常量，否则 `recorded`
     会被强行改回 `arrows_pure`）。
  3. `app_window.py`：新增唯一入口 `_show_image_frame(ImageFrame)`（plan → 渲染 → 一个 QImage 给面板），
     **四条生产者全部改走它**：实时/重算（`_render_run_image`，来源按 `_recompute_running` 区分）、回放
     （`_render_replay_frame` 用 `replay.video_frame_bgr()`，不再自己转 QImage）、摄像头预览
     （`_on_preview_tick`）。`_render_run_image` 里那套按 `mode` 分支画箭头的代码整体删除。
  4. `replay.py`：新增 `video_frame_bgr()`（按光标缓存 BGR），`video_image()` 保留为兼容薄封装；删除
     本模块的 `_bgr_to_qimage`。
  5. locale：新增 `panels.replay_raw_note`（录像只有原始图像的说明 + 指路「由视频重算」）、
     `panels.frame_missing_note`（`{fields}` 参数化）、`panels.field_flow`/`panels.field_depth`、
     `panels.recompute_pipeline(_tip)`（中英各一套）。
- Why: 用户报的两个 bug 之一——「历史回放面板的 2 维图只能显示原始采集图像，没有进行任何处理」，并建议
  "每一个 2D 图的后端保持一致"。核对后确认根因是架构而非漏了一步渲染：二维有三个（实际四个）互不一致的
  生产者——实时/重算走 `draw_arrow_display`/`depth_map_to_bgr`，回放与预览把 BGR 直接交给面板；模式集与
  注解由**视图预设**决定（`arrow_panel.set_source_kind("replay")` 才切成 `recorded`），于是同一段视频在
  "回放"和"重算"下是两个成像栈，且 `_bgr_to_qimage` 有两份实现。用户已选定"统一后端 + 一键重算（不改记录
  格式）"，本提交做前半段；"一键重算"的入口在下一提交。
- Verification:
  · 新增 `shared/tests/test_image_backend.py` 15 项：plan 的三类来源（live/recompute 三种派生视图、
  replay/preview 只有 recorded）、`missing`/`note_key`/`note_fields`、模式回退、**与旧渲染逐像素一致**
  （arrows_pure/arrows_stitched 对 `draw_arrow_display`、depth 对 `depth_map_to_bgr` 带主题色带）、
  原始帧不做缩放/不替图、缺 depth → None、缺 flow → 底图、灰度帧只在这里加宽一次。
  · `apps/studio/tests/test_ui_smoke.py` +2：同一段视频在回放路径只出 `recorded` 且有说明行、在重算/实时
  路径出三种派生视图且都经过同一个 `render_image`（用 spy 断言来源与模式）、面板 `note_label` 不是裸键、
  combo 项数与模式集一致；以及"全应用只有一处 BGR→QImage"的结构断言。
  · 既有 `test_depth_view_reports_missing_data_and_fixes_its_scale`（缺深度必须报"本帧没有深度数据"而不是
  回退显示普通形变图）继续通过——新的"缺字段说明 + 不回退替图"语义与它一致。
  · 全量：apps/studio 236 项 0 失败 14 跳过；shared 331 项 0 失败 1 跳过；ui_check 587 项 0 失败；
  locale_check 0 缺失。
- Not in this change: 「一键重算」按钮与"实时界面禁止回放入口"（7.2/7.3）；深度图改用主题色带改变了 depth
  视图的颜色（这是修正：色条一直画的就是主题色带）；三维（scene3d）未动；录像格式未动（仍只存原始相机图像）。

apps/studio/config/locales/en_US.json

@@ -149,6 +149,12 @@
     "view_mode_tip": "Image display mode while running",
     "replay_pipeline": "Recorded video (raw camera image)",
     "replay_pipeline_tip": "Replay shows the recorded raw camera image with no live arrow overlay; to check the algorithm, use View → Recompute forces from the video",
+    "replay_raw_note": "A recording stores only the raw camera image: there is no flow or depth to draw. Use “Recompute from the video” for the algorithm's output",
+    "frame_missing_note": "This frame carries no {fields}: there is nothing for this view to draw",
+    "field_flow": "flow",
+    "field_depth": "depth",
+    "recompute_pipeline": "Recomputed from the recording (not the recorded value)",
+    "recompute_pipeline_tip": "This frame is what the current algorithm version computes for that footage — not the measurement that was recorded at the time.",
     "replay_empty": "No recording open\nPress “Open recording…” below",
     "arrow_empty": "No image yet\nPick a video or camera, then press Run",
     "arrow_empty_tip": "The deformation arrow image appears here while running or previewing",

apps/studio/config/locales/zh_CN.json

@@ -149,6 +149,12 @@
     "view_mode_tip": "运行时的图像显示模式",
     "replay_pipeline": "录制视频（原始相机图像）",
     "replay_pipeline_tip": "回放显示的是录制下来的原始相机图像，不含实时箭头叠加；要复核算法请用「视图 → 由视频重算力值」",
+    "replay_raw_note": "录像只保存原始相机图像：这里没有光流/深度可画。要看算法处理结果，请用「由视频重算」",
+    "frame_missing_note": "本帧没有{fields}：这个视图这一帧没有数据可画",
+    "field_flow": "光流",
+    "field_depth": "深度",
+    "recompute_pipeline": "由录像重算（非记录值）",
+    "recompute_pipeline_tip": "这一帧是当前算法版本对录像重新计算得到的，不是当初记录下来的测量值。",
     "replay_empty": "尚未打开录制\n点击下方「打开录制…」",
     "arrow_empty": "尚未采集图像\n请选择视频或摄像机后点击「运行」",
     "arrow_empty_tip": "运行或预览后在此显示形变箭头图",

apps/studio/src/orisys_studio/app_window.py

@@ -29,6 +29,16 @@ from PyQt5.QtWidgets import (
 )
 
 from orisys_app_shared.acquisition.constants import FORCE_SAMPLE_RATE_HZ
+from orisys_app_shared.acquisition.image_backend import (
+    DEPTH,
+    SOURCE_LIVE,
+    SOURCE_PREVIEW,
+    SOURCE_RECOMPUTE,
+    SOURCE_REPLAY,
+    ImageFrame,
+    plan_image,
+    render_image,
+)
 from orisys_app_shared.acquisition.sdk_worker import short_capture_fallacy
 from orisys_app_shared.force import select_display_forces
 from orisys_app_shared.force.calibration_recorder import CalibrationRecorder
@@ -48,7 +58,7 @@ from orisys_app_shared.theme import build_qss, clear_theme_cache, color
 
 from orisys_studio.ui import record_status as record_states
 from orisys_studio.ui.about_dialog import AboutDialog
-from orisys_studio.ui.arrow_panel import ArrowPanel
+from orisys_studio.ui.arrow_panel import ArrowPanel, bgr_to_qimage
 from orisys_studio.ui.brand_bar import BrandBar
 from orisys_studio.ui.cal_panel import CalPanel
 from orisys_studio.ui.force_plots import CHANNEL_LABELS, ForcePlotsPanel
@@ -111,11 +121,9 @@ CONNECT_SLOW_HINT_S = 8.0
 PLAYBACK_TICK_MS = 33
 
 
-def _bgr_to_qimage(frame: np.ndarray) -> QImage:
+#: Kept under its historical name for ``tools/ui_snapshot.py``, which imports it from
-    rgb = frame[:, :, ::-1].copy()
+#: here. There is one conversion in the application (``ui.arrow_panel.bgr_to_qimage``).
-    h, w, ch = rgb.shape
+_bgr_to_qimage = bgr_to_qimage
-    bytes_per_line = ch * w
-    return QImage(rgb.data, w, h, bytes_per_line, QImage.Format_RGB888).copy()
 
 
 def _reveal_in_explorer(path: Path) -> None:
@@ -1047,7 +1055,7 @@ class StudioMainWindow(QMainWindow):
             # the data, and the 2D panel shows what it produces. The pass starts
             # here so the switch is not a blank chart waiting for a second click.
             self.force_plots.clear_recording_source()
-            self.arrow_panel.set_source_kind("live")
+            self.arrow_panel.set_source_kind("recompute")
             self.toolbar.set_source_mode("video")
             self.toolbar.set_video_path(str(segment))
             self._refresh_status_rail()
@@ -1075,18 +1083,29 @@ class StudioMainWindow(QMainWindow):
             self._render_replay_frame()
 
     def _render_replay_frame(self) -> None:
-        """Draw what the 2D panel should show for the current replay cursor."""
+        """Draw what the 2D panel should show for the current replay cursor.
+
+        A recording stores the raw camera image and nothing else, so the frame this
+        builds has no flow and no depth — the plan then says so, in one line, and the
+        panel offers exactly the one view the frame can be. The processed picture of the
+        same footage is what 「从视频重算」 produces, through the *same* backend.
+        """
         if self._view_preset != "replay" or not self.replay.has_video():
             return
         if self._recompute_running:
             # The pipeline is drawing its own frames (see ``_replay_owns_image``).
             return
-        self.arrow_panel.set_depth_scale(None)
+        image = self.replay.video_frame_bgr()
-        image = self.replay.video_image()
         if image is None:
             self.arrow_panel.clear_preview(self.replay.video_message())
-        else:
+            return
-            self.arrow_panel.show_frame(image)
+        self._show_image_frame(
+            ImageFrame(
+                image,
+                source=SOURCE_REPLAY,
+                t_rel_s=float(self.replay.position()),
+            )
+        )
 
     def _apply_replay_source(self, active: bool) -> None:
         """Point the charts at the recording (or back at the live session)."""
@@ -2405,7 +2424,9 @@ class StudioMainWindow(QMainWindow):
             self._stop_preview(announce=True)
             self.statusBar().showMessage(t("status.preview_failed", error="no frame"))
             return
-        self.arrow_panel.show_frame(_bgr_to_qimage(frame))
+        # A preview is the camera, unprocessed: it goes through the same sink as
+        # everything else, where the plan states that it carries no field.
+        self._show_image_frame(ImageFrame(frame, source=SOURCE_PREVIEW))
 
     def _on_run_toggled(self, checked: bool) -> None:
         if self.toolbar.run_role() == "playback":
@@ -2862,59 +2883,62 @@ class StudioMainWindow(QMainWindow):
     def _render_run_image(self, packet) -> None:
         if packet is None or self._replay_owns_image():
             return
-        from orisys_app_shared.acquisition.arrows import (
+        self._show_image_frame(
-            arrow_display_scale,
+            ImageFrame(
-            depth_map_to_bgr,
+                getattr(packet, "processed_frame", None),
-            draw_arrow_display,
+                flow=getattr(packet, "flow", None),
-            flow_colormap,
+                depth=getattr(packet, "depth", None),
-            hex_to_bgr,
+                valid_mask=getattr(packet, "valid_mask", None),
+                source=SOURCE_RECOMPUTE if self._recompute_running else SOURCE_LIVE,
+                frame_id=int(getattr(packet, "frame_id", 0) or 0),
+                t_rel_s=float(getattr(packet, "mono_t", 0.0) or 0.0),
+            )
         )
 
-        mode = self.arrow_panel.view_mode()
+    def _show_image_frame(self, frame: ImageFrame) -> None:
+        """The single 2D sink: plan the frame, render it, hand the panel one image.
+
+        Live, recomputed, replayed and previewed frames all arrive here, so the mode
+        set and the annotations follow the frame's own fields rather than which view
+        happens to be on screen.
+        """
+        from orisys_app_shared.acquisition.arrows import arrow_display_scale, hex_to_bgr
+
+        plan = plan_image(frame)
+        self.arrow_panel.set_plan(plan)
+        mode = plan.resolve(self.arrow_panel.view_mode())
+        self.arrow_panel.set_view_mode(mode)
         self._last_rendered_view_mode = mode
         draw_style = self._draw_style()
         # The legend is decided by the same inputs as the picture: the arrow
         # magnification of this sensor's draw style, and whether this frame
         # carries a valid-area mask.
         self.arrow_panel.set_arrow_scale(arrow_display_scale(draw_style))
-        self.arrow_panel.set_valid_area(getattr(packet, "valid_mask", None) is not None)
+        self.arrow_panel.set_valid_area(frame.valid_mask is not None)
-        colormap = flow_colormap(self._theme)
+        if mode == DEPTH:
-        if mode == "depth":
+            self._last_depth_frame = frame.depth
-            self._last_depth_frame = packet.depth
-            depth_bgr = depth_map_to_bgr(
-                packet.depth,
-                value_range=self._depth_range(),
-                invalid_mask=packet.valid_mask,
-            )
-            if depth_bgr is None:
-                # Never substitute the processed frame here: that made a missing
-                # depth map look like a depth reading. Say so instead.
-                self.arrow_panel.clear_preview(t("panels.depth_unavailable"))
-                self.arrow_panel.set_depth_scale(None)
-                return
             self.arrow_panel.set_depth_scale(self._depth_scale_text())
-            frame = depth_bgr
-        elif mode == "arrows_stitched":
-            frame = draw_arrow_display(
-                packet.processed_frame,
-                packet.flow,
-                background="captured",
-                draw_style=draw_style,
-                valid_mask=packet.valid_mask,
-                colormap=colormap,
-            )
         else:
-            canvas_bgr = hex_to_bgr(color(self._theme, "arrow_canvas", "#0B1830"))
+            self.arrow_panel.set_depth_scale(None)
-            frame = draw_arrow_display(
+        rendered = render_image(
-                packet.processed_frame,
+            frame,
-                packet.flow,
+            plan,
-                background="pure_color",
+            mode=mode,
-                canvas_bgr=canvas_bgr,
+            theme=self._theme,
-                draw_style=draw_style,
+            draw_style=draw_style,
-                valid_mask=packet.valid_mask,
+            depth_range=self._depth_range(),
-                colormap=colormap,
+            canvas_bgr=hex_to_bgr(color(self._theme, "arrow_canvas", "#0B1830")),
+        )
+        if rendered is None:
+            # Never substitute another picture here: a missing depth map that showed
+            # the processed frame made "no depth" look like a depth reading.
+            self.arrow_panel.clear_preview(
+                t("panels.depth_unavailable")
+                if mode == DEPTH
+                else t("panels.arrow_empty")
             )
-        self.arrow_panel.show_frame(_bgr_to_qimage(frame))
+            return
+        self.arrow_panel.show_frame(bgr_to_qimage(rendered))
 
     def _restore_geometry(self) -> None:
         geo = self.prefs.get("window_geometry")

apps/studio/src/orisys_studio/replay.py

@@ -15,10 +15,10 @@ from __future__ import annotations
 
 import logging
 from pathlib import Path
+from typing import Optional
 
 import numpy as np
 from PyQt5.QtCore import QObject, pyqtSignal
-from PyQt5.QtGui import QImage
 
 from orisys_app_shared.i18n import t
 from orisys_app_shared.record import RecordingReader, VideoOnlySource
@@ -26,12 +26,6 @@ from orisys_app_shared.record import RecordingReader, VideoOnlySource
 logger = logging.getLogger(__name__)
 
 
-def _bgr_to_qimage(frame: np.ndarray) -> QImage:
-    rgb = frame[:, :, ::-1].copy()
-    height, width, channels = rgb.shape
-    return QImage(rgb.data, width, height, channels * width, QImage.Format_RGB888).copy()
-
-
 def _sdk_version() -> str:
     """The SDK version in use, or "" when the SDK is not importable."""
     try:
@@ -64,7 +58,7 @@ class ReplayController(QObject):
         self._position = 0.0
         #: The frame cache: one video image per cursor position.
         self._video_position: float | None = None
-        self._video_qimage: QImage | None = None
+        self._video_bgr: Optional[np.ndarray] = None
         self._video_reason = ""
         self._warnings = ""
 
@@ -171,7 +165,7 @@ class ReplayController(QObject):
 
     def _reset_frames(self) -> None:
         self._video_position = None
-        self._video_qimage = None
+        self._video_bgr = None
         self._video_reason = ""
 
     # ---------------------------------------------------------------- cursor
@@ -209,9 +203,21 @@ class ReplayController(QObject):
         return self._unit
 
     # ----------------------------------------------------------------- frames
-    def video_image(self) -> QImage | None:
+    def video_frame_bgr(self) -> Optional[np.ndarray]:
+        """The recorded frame under the cursor, as BGR.
+
+        The engine hands over pixels, not a prepared widget image: the single 2D
+        backend (``acquisition.image_backend``) decides what the picture is.
+        """
         self._refresh_video()
-        return self._video_qimage
+        return self._video_bgr
+
+    def video_image(self):
+        """The same frame as a ``QImage`` (kept for callers that predate the plan)."""
+        from orisys_studio.ui.arrow_panel import bgr_to_qimage
+
+        frame = self.video_frame_bgr()
+        return None if frame is None else bgr_to_qimage(frame)
 
     def video_message(self) -> str:
         self._refresh_video()
@@ -220,7 +226,7 @@ class ReplayController(QObject):
     def _refresh_video(self) -> None:
         if self._reader is None and self._video is None:
             self._video_position = None
-            self._video_qimage = None
+            self._video_bgr = None
             self._video_reason = t("playback.none_found")
             return
         if self._video_position == self._position:
@@ -229,15 +235,15 @@ class ReplayController(QObject):
         if self._video is not None:
             image, _frame = self._video.video_frame_at(self._position)
             if image is None:
-                self._video_qimage = None
+                self._video_bgr = None
                 self._video_reason = t("playback.frame_unreadable")
                 return
             self._video_reason = ""
-            self._video_qimage = _bgr_to_qimage(image)
+            self._video_bgr = image
             return
         image, frame = self._reader.video_frame_at(self._position)
         if image is None:
-            self._video_qimage = None
+            self._video_bgr = None
             self._video_reason = (
                 t("playback.frame_dropped")
                 if frame is not None and not frame.in_video
@@ -245,7 +251,7 @@ class ReplayController(QObject):
             )
             return
         self._video_reason = ""
-        self._video_qimage = _bgr_to_qimage(image)
+        self._video_bgr = image
 
     # ---------------------------------------------------------------- notes
     def warnings_text(self) -> str:

apps/studio/src/orisys_studio/ui/arrow_panel.py

@@ -1,7 +1,17 @@
-"""2D image panel: arrows / depth view with mode selector."""
+"""2D image panel: arrows / depth view with mode selector.
+
+The modes offered are **not** decided here: they come from the frame itself, through
+``orisys_app_shared.acquisition.image_backend.plan_image`` (see
+``ArrowPanel.set_plan``). A recorded frame has no flow and no depth, so it has exactly
+one thing it can be — a raw picture — and the panel says so instead of offering a view
+that would have to invent the data. ``set_source_kind`` keeps its older role: naming
+where the picture comes from (live / replay), which words the footer.
+"""
 
 from __future__ import annotations
 
+from typing import Optional
+
 from PyQt5.QtCore import QSize, Qt, pyqtSignal
 from PyQt5.QtGui import QImage, QPainter, QPixmap, QTransform
 from PyQt5.QtWidgets import (
@@ -13,19 +23,38 @@ from PyQt5.QtWidgets import (
     QVBoxLayout,
 )
 
+from orisys_app_shared.acquisition.image_backend import (
+    ARROW_PURE,
+    ARROW_STITCHED,
+    DEPTH,
+    ImagePlan,
+)
 from orisys_app_shared.i18n import t
 from orisys_app_shared.theme import color
 
 from orisys_studio.ui.fit_text import ShrinkableLabel
 
-VIEW_MODES = ("arrows_pure", "arrows_stitched", "depth")
+VIEW_MODES = (ARROW_PURE, ARROW_STITCHED, DEPTH)
 #: While replaying a recording there is no optical flow to draw and no depth is
 #: stored: the panel shows the recorded frames, and nothing else.
 REPLAY_VIEW_MODES = ("recorded",)
+
+
+def bgr_to_qimage(frame) -> QImage:
+    """The one BGR→QImage conversion in the application.
+
+    It used to exist twice (the window and the replay controller), which is how a
+    picture can look slightly different depending on which path produced it.
+    """
+    rgb = frame[:, :, ::-1].copy()
+    height, width, channels = rgb.shape
+    return QImage(rgb.data, width, height, channels * width, QImage.Format_RGB888).copy()
+
+
 _VIEW_LABELS = {
-    "arrows_pure": "panels.view_arrows_pure",
+    ARROW_PURE: "panels.view_arrows_pure",
-    "arrows_stitched": "panels.view_arrows_stitched",
+    ARROW_STITCHED: "panels.view_arrows_stitched",
-    "depth": "panels.view_depth",
+    DEPTH: "panels.view_depth",
     "recorded": "panels.view_recorded",
 }
 _ROTATION_STEPS = (0, 90, 180, 270)
@@ -141,6 +170,11 @@ class ArrowPanel(QFrame):
         self._arrow_scale = 2.0
         self._valid_area = False
         self._source_kind = "live"
+        #: The modes the frame on screen can be shown as, when a plan has been given.
+        #: Empty means "no plan yet": the preset-based list is used, which is how the
+        #: panel behaved before the plans existed.
+        self._modes: tuple[str, ...] = ()
+        self._plan_note = ""
         self.view_combo = QComboBox()
         self.view_combo.setMinimumWidth(140)
         self.view_combo.currentIndexChanged.connect(self._on_view_index_changed)
@@ -180,6 +214,11 @@ class ArrowPanel(QFrame):
         self.scale_label = annotation()
         self.pipeline_label = annotation()
         self.area_label = annotation()
+        # One line that explains a *plan* the operator may not expect ("this recording
+        # stores only the raw camera image"), so the panel never looks like it forgot
+        # to process the picture.
+        self.note_label = annotation()
+        self.note_label.setVisible(False)
         # Shows the fixed depth colour-scale range, so two frames can be
         # compared instead of the scale silently re-fitting every frame.
         self.depth_scale_label = QLabel()
@@ -190,6 +229,7 @@ class ArrowPanel(QFrame):
         footer.addWidget(self.scale_label)
         footer.addWidget(self.pipeline_label)
         footer.addWidget(self.area_label)
+        footer.addWidget(self.note_label)
         footer.addStretch(1)
         footer.addWidget(self.colorbar)
         footer.addWidget(self.depth_scale_label)
@@ -200,9 +240,11 @@ class ArrowPanel(QFrame):
         return str(data or "arrows_pure")
 
     def set_view_mode(self, mode: str) -> None:
-        wanted = str(mode or "arrows_pure")
+        wanted = str(mode or "")
-        if wanted not in VIEW_MODES:
+        if wanted not in self.view_modes():
-            wanted = "arrows_pure"
+            # A mode this frame cannot offer: fall back to the first one it can.
+            modes = self.view_modes()
+            wanted = modes[0] if modes else ARROW_PURE
         idx = self.view_combo.findData(wanted)
         if idx < 0:
             idx = 0
@@ -276,12 +318,17 @@ class ArrowPanel(QFrame):
         """Switch between live frames and a recording being replayed.
 
         A recording has no optical flow to draw, so the arrow entries disappear
-        rather than offering a view that would be a lie.
+        rather than offering a view that would be a lie. When a plan has been given
+        (``set_plan``) it is the plan that decides the modes; this only words the
+        footer: ``live`` (the acquisition pipeline), ``recompute`` (the same pipeline
+        being run over a recording) or ``replay`` (the recording's own frames).
         """
-        wanted = "replay" if str(kind) == "replay" else "live"
+        wanted = str(kind) if str(kind) in ("live", "recompute", "replay") else "live"
         if wanted == self._source_kind:
             return
         self._source_kind = wanted
+        # No plan for this picture: fall back to the preset-based list.
+        self._modes = ()
         self._populate_view_combo()
         self._refresh_pipeline_label()
         self._refresh_footer_visibility()
@@ -289,10 +336,43 @@ class ArrowPanel(QFrame):
             self._placeholder = self._empty_message()
             self.image_label.setText(self._placeholder)
 
+    def set_plan(self, plan: Optional[ImagePlan]) -> None:
+        """Adopt what the frame on screen can be shown as.
+
+        The modes come from the frame's own fields (see ``image_backend.plan_image``),
+        so the same video offers the same views whether it is being replayed or
+        recomputed — and a raw frame offers exactly one. The current selection is kept
+        when the new plan still allows it.
+        """
+        modes = tuple(plan.available_modes) if plan is not None else ()
+        note = ""
+        if plan is not None and plan.note_key:
+            if plan.note_fields:
+                names = "、".join(
+                    t(f"panels.field_{name}")
+                    for name in plan.note_fields
+                    if name in ("flow", "depth")
+                )
+                note = t(plan.note_key, fields=names)
+            else:
+                note = t(plan.note_key)
+        if modes != self._modes or note != self._plan_note:
+            self._modes = modes
+            self._plan_note = note
+            self.note_label.setText(note)
+            self._populate_view_combo()
+            self._refresh_footer_visibility()
+
+    def plan_modes(self) -> tuple[str, ...]:
+        """The modes currently offered (empty means "no plan: preset-based")."""
+        return self._modes
+
     def source_kind(self) -> str:
         return self._source_kind
 
     def view_modes(self) -> tuple[str, ...]:
+        if self._modes:
+            return self._modes
         return REPLAY_VIEW_MODES if self._source_kind == "replay" else VIEW_MODES
 
     def set_theme(self, theme: str) -> None:
@@ -313,23 +393,28 @@ class ArrowPanel(QFrame):
         self.scale_label.setToolTip(t("panels.arrow_scale_tip"))
 
     def _refresh_footer_visibility(self) -> None:
-        """Arrow annotations and the depth legend are mutually exclusive."""
+        """Arrow annotations and the depth legend are mutually exclusive.
-        depth = self.view_mode() == "depth"
+
-        replay = self._source_kind == "replay"
+        What is shown follows the *modes this frame supports*: the magnification and
-        # The magnification and the valid area describe the live flow drawing;
+        the valid area describe a flow drawing, so they are shown only when an arrow
-        # neither exists for a recorded frame.
+        mode is on offer.
-        self.scale_label.setVisible(not depth and not replay)
+        """
+        depth = self.view_mode() == DEPTH
+        modes = self.view_modes()
+        has_arrows = ARROW_PURE in modes or ARROW_STITCHED in modes
+        self.scale_label.setVisible(not depth and has_arrows)
         self.pipeline_label.setVisible(not depth)
-        self.area_label.setVisible(not depth and not replay)
+        self.area_label.setVisible(not depth and has_arrows)
         self.colorbar.setVisible(depth)
         self.depth_scale_label.setVisible(depth and bool(self._depth_scale_text))
+        self.note_label.setVisible(bool(self._plan_note))
 
     def _populate_view_combo(self) -> None:
         current = self.view_combo.currentData()
         self.view_combo.blockSignals(True)
         self.view_combo.clear()
         for mode in self.view_modes():
-            self.view_combo.addItem(t(_VIEW_LABELS[mode]), mode)
+            self.view_combo.addItem(t(_VIEW_LABELS.get(mode, mode)), mode)
         if current:
             idx = self.view_combo.findData(current)
             if idx >= 0:
@@ -344,11 +429,12 @@ class ArrowPanel(QFrame):
         self.title.setText(t("panels.arrow"))
         for i, mode in enumerate(self.view_modes()):
             if i < self.view_combo.count():
-                self.view_combo.setItemText(i, t(_VIEW_LABELS[mode]))
+                self.view_combo.setItemText(i, t(_VIEW_LABELS.get(mode, mode)))
         self.view_combo.setToolTip(t("panels.view_mode_tip"))
         self.image_label.setToolTip(t("panels.arrow_empty_tip"))
         self._refresh_pipeline_label()
         self._refresh_scale_label()
+        self.note_label.setText(self._plan_note)
         self.set_valid_area(self._valid_area)
         if not self.image_label.pixmap() or self.image_label.pixmap().isNull():
             self._placeholder = self._empty_message()
@@ -359,6 +445,12 @@ class ArrowPanel(QFrame):
             self.pipeline_label.setText(t("panels.replay_pipeline"))
             self.pipeline_label.setToolTip(t("panels.replay_pipeline_tip"))
             return
+        if self._source_kind == "recompute":
+            # The pipeline is drawing again, over a recording: the same picture as a
+            # live run, about footage rather than about now.
+            self.pipeline_label.setText(t("panels.recompute_pipeline"))
+            self.pipeline_label.setToolTip(t("panels.recompute_pipeline_tip"))
+            return
         self.pipeline_label.setText(t("panels.arrow_pipeline"))
         self.pipeline_label.setToolTip(t("panels.arrow_pipeline_tip"))
 

apps/studio/tests/test_ui_smoke.py

@@ -2151,6 +2151,102 @@ def test_a_bare_video_plays_even_though_it_is_not_a_recording(make_window, recor
         window.close()
 
 
+def test_the_replay_and_the_live_paths_share_one_image_backend(make_window, record_root):
+    """Stage 7: one renderer for every 2D producer, and modes from the frame itself.
+
+    A recording stores the raw camera image and nothing else, so its plan offers exactly
+    one view and says why; a recomputed (or live) frame offers the derived views and goes
+    through the *same* ``render_image``. Before this, the replay path handed a QImage
+    straight to the panel while live/recompute went through two different drawing calls.
+    """
+    import cv2
+    import numpy as np
+    from PyQt5.QtWidgets import QApplication
+
+    import orisys_studio.app_window as app_module
+    from orisys_app_shared.acquisition.image_backend import (
+        DERIVED_MODES,
+        ImageFrame,
+        SOURCE_LIVE,
+        SOURCE_RECOMPUTE,
+    )
+
+    bare = Path(record_root) / "backend_video.mp4"
+    writer = cv2.VideoWriter(str(bare), cv2.VideoWriter_fourcc(*"mp4v"), 30.0, (64, 48))
+    for index in range(30):
+        writer.write(np.full((48, 64, 3), index * 8, dtype=np.uint8))
+    writer.release()
+    assert bare.is_file()
+
+    window = _show(make_window(), (1440, 880))
+    original = app_module.render_image
+    seen: list = []
+
+    def spy(frame, plan=None, **kwargs):
+        seen.append((frame.source, kwargs.get("mode")))
+        return original(frame, plan, **kwargs)
+
+    app_module.render_image = spy
+    try:
+        window._apply_view_preset("replay")
+        assert window._load_replay_video(bare) is True
+        window._render_replay_frame()
+        QApplication.processEvents()
+        assert window.arrow_panel.plan_modes() == ("recorded",), (
+            "a recording must not offer a derived view"
+        )
+        assert seen and seen[-1][0] == "replay"
+        note = window.arrow_panel.note_label.text()
+        assert note and note != "panels.replay_raw_note", note
+        assert window.arrow_panel.view_combo.count() == 1
+
+        # The pipeline drawing over the same footage: derived modes, same backend.
+        window.arrow_panel.set_source_kind("recompute")
+        shape = (48, 64)
+        window._show_image_frame(
+            ImageFrame(
+                np.zeros((*shape, 3), dtype=np.uint8),
+                flow=np.ones((*shape, 2), dtype=np.float32),
+                depth=np.zeros(shape, dtype=np.float32),
+                source=SOURCE_RECOMPUTE,
+                frame_id=7,
+            )
+        )
+        assert window.arrow_panel.plan_modes() == DERIVED_MODES
+        assert seen[-1] == ("recompute", "arrows_pure")
+        assert window.arrow_panel.view_combo.count() == len(DERIVED_MODES)
+
+        # And the live packet path is the same sink (through the same spy).
+        window._show_image_frame(
+            ImageFrame(
+                np.full((*shape, 3), 9, dtype=np.uint8),
+                flow=np.ones((*shape, 2), dtype=np.float32),
+                source=SOURCE_LIVE,
+                frame_id=8,
+            )
+        )
+        assert seen[-1][0] == "live"
+    finally:
+        app_module.render_image = original
+        window.close()
+
+
+def test_the_application_converts_bgr_to_qimage_in_one_place():
+    """Two conversions is how the same frame looks different on two paths."""
+    import orisys_studio.app_window as app_module
+    import orisys_studio.ui.arrow_panel as arrow_panel
+
+    assert app_module._bgr_to_qimage is arrow_panel.bgr_to_qimage
+    root = Path(app_module.__file__).resolve().parent
+    others = sorted(
+        path.name
+        for path in root.rglob("*.py")
+        if path.name != "arrow_panel.py"
+        and "def bgr_to_qimage" in path.read_text(encoding="utf-8")
+    )
+    assert others == [], f"another BGR→QImage conversion exists: {others}"
+
+
 def test_a_file_that_is_not_a_video_at_all_is_refused_with_a_reason(
     make_window, record_root
 ):

shared/src/orisys_app_shared/acquisition/image_backend.py

@@ -0,0 +1,220 @@
+"""One place that turns a frame into the picture the 2D panel shows.
+
+The application used to have four producers of that picture and two different imaging
+stacks: live and recomputed frames went through ``draw_arrow_display``/
+``depth_map_to_bgr`` in the window, the preview and the replay path handed a raw BGR
+frame straight to the panel, and the panel decided which view modes existed from the
+*view preset* (``set_source_kind("replay")``) rather than from what the frame actually
+carried. The same video therefore behaved differently in "replay" and "recompute", and
+a mode that needed data nobody had could still be offered.
+
+This module is the single backend. Two rules make the difference:
+
+* **the frame says what it has** (:class:`ImageFrame`), and the plan is derived from
+  that — not from which view is on screen. A frame with no flow has no arrow modes; a
+  frame with no depth has no depth mode; a frame with neither is a raw picture;
+* **rendering is one function** (:func:`render_image`), so live, recompute, replay and
+  preview cannot drift apart. A mode the frame cannot support falls back to the plan's
+  default instead of drawing something plausible.
+
+NumPy only: the Qt conversion belongs to the UI layer (``ui/arrow_panel.bgr_to_qimage``).
+"""
+
+from __future__ import annotations
+
+from dataclasses import dataclass
+from typing import Optional, Sequence
+
+import numpy as np
+
+from orisys_app_shared.acquisition.arrows import (
+    depth_map_to_bgr,
+    draw_arrow_display,
+    flow_colormap,
+)
+from orisys_app_shared.acquisition.models import ensure_bgr
+
+#: The view modes, in the order a panel should offer them. ``recorded`` is not a
+#: choice: it is what is left when the frame carries no derived field at all.
+ARROW_PURE = "arrows_pure"
+ARROW_STITCHED = "arrows_stitched"
+DEPTH = "depth"
+RECORDED = "recorded"
+
+DERIVED_MODES = (ARROW_PURE, ARROW_STITCHED, DEPTH)
+ALL_MODES = (*DERIVED_MODES, RECORDED)
+
+#: Where a frame came from. Only used for wording and for the recording; the modes
+#: come from the frame's own fields.
+SOURCE_LIVE = "live"
+SOURCE_RECOMPUTE = "recompute"
+SOURCE_REPLAY = "replay"
+SOURCE_PREVIEW = "preview"
+
+#: Shown when the only thing a frame can be is a raw picture.
+RAW_NOTE_KEY = "panels.replay_raw_note"
+#: Shown when a frame of a *derived* source is missing a field (a dropped frame, a
+#: failed tracker): the mode stays selectable — that is the operator's choice — and the
+#: line says which field is absent instead of the view looking broken.
+MISSING_NOTE_KEY = "panels.frame_missing_note"
+
+#: Sources whose frames carry derived fields.
+DERIVED_SOURCES = (SOURCE_LIVE, SOURCE_RECOMPUTE)
+
+
+@dataclass(frozen=True)
+class ImageFrame:
+    """A picture to draw, plus whatever derived fields came with it.
+
+    ``image_bgr`` is the *base* picture (the processed/unrolled frame for a live or
+    recomputed source, the recorded or camera frame otherwise). ``flow``/``depth``/
+    ``valid_mask`` are the same arrays the rest of the pipeline uses; ``None`` means the
+    frame does not have them, and the plan will say so rather than offer a mode that
+    would have to invent them.
+    """
+
+    image_bgr: Optional[np.ndarray] = None
+    flow: Optional[np.ndarray] = None
+    depth: Optional[np.ndarray] = None
+    valid_mask: Optional[np.ndarray] = None
+    source: str = SOURCE_LIVE
+    frame_id: int = 0
+    t_rel_s: float = 0.0
+    #: True when the producer knows this frame's measurement is not current (the
+    #: coordinator's "stale" state); the panel can say so under the picture.
+    stale: bool = False
+
+    def has_flow(self) -> bool:
+        return self.flow is not None
+
+    def has_depth(self) -> bool:
+        return self.depth is not None
+
+
+@dataclass(frozen=True)
+class ImagePlan:
+    """What this frame can be shown as, and what is missing from it."""
+
+    available_modes: tuple[str, ...]
+    default_mode: str
+    missing: tuple[str, ...]
+    source: str
+    frame_id: int
+    t_rel_s: float
+    stale: bool
+    #: An i18n key for the one line that explains the plan, or ``""``. When
+    #: :attr:`note_fields` is non-empty the line takes it as ``fields``.
+    note_key: str = ""
+    note_fields: tuple[str, ...] = ()
+
+    def accepts(self, mode: str) -> bool:
+        return str(mode) in self.available_modes
+
+    def resolve(self, mode: str) -> str:
+        """The mode to draw: the request, or the default when it cannot be drawn."""
+        wanted = str(mode or "")
+        return wanted if self.accepts(wanted) else self.default_mode
+
+    def needs(self, mode: str) -> Optional[str]:
+        """The field a mode needs that this frame does not have, if any."""
+        wanted = str(mode or "")
+        if wanted in (ARROW_PURE, ARROW_STITCHED) and not self.has_flow():
+            return "flow"
+        if wanted == DEPTH and not self.has_depth():
+            return "depth"
+        return None
+
+    def has_flow(self) -> bool:
+        return "flow" not in self.missing
+
+    def has_depth(self) -> bool:
+        return "depth" not in self.missing
+
+
+def plan_image(frame: ImageFrame) -> ImagePlan:
+    """Derive the modes from the frame's *source* and its own fields.
+
+    Two different questions, deliberately answered in two different places:
+
+    * **which views may the operator choose?** For a source that carries derived fields
+      (live, recompute) all of them — a single dropped frame must not silently switch
+      the operator's view. For a source that never does (a recording, a camera preview)
+      exactly one, because offering the others would be offering a lie;
+    * **what can this frame actually be drawn as?** ``missing`` says which field is
+      absent, and the panel states it in one line.
+    """
+    derived = str(frame.source or SOURCE_LIVE) in DERIVED_SOURCES
+    missing: list[str] = []
+    if not frame.has_flow():
+        missing.append("flow")
+    if not frame.has_depth():
+        missing.append("depth")
+    if not derived:
+        return ImagePlan(
+            available_modes=(RECORDED,),
+            default_mode=RECORDED,
+            missing=("flow", "depth"),
+            source=str(frame.source or SOURCE_LIVE),
+            frame_id=int(frame.frame_id),
+            t_rel_s=float(frame.t_rel_s),
+            stale=bool(frame.stale),
+            note_key=RAW_NOTE_KEY,
+        )
+    default = ARROW_PURE if frame.has_flow() else (DEPTH if frame.has_depth() else ARROW_PURE)
+    return ImagePlan(
+        available_modes=DERIVED_MODES,
+        default_mode=default,
+        missing=tuple(missing),
+        source=str(frame.source or SOURCE_LIVE),
+        frame_id=int(frame.frame_id),
+        t_rel_s=float(frame.t_rel_s),
+        stale=bool(frame.stale),
+        note_key=MISSING_NOTE_KEY if missing else "",
+        note_fields=tuple(missing),
+    )
+
+
+def render_image(
+    frame: ImageFrame,
+    plan: Optional[ImagePlan] = None,
+    *,
+    mode: str = "",
+    theme: str = "dark",
+    draw_style: str = "box",
+    depth_range: Optional[tuple[float, float]] = None,
+    canvas_bgr: Optional[Sequence[int]] = None,
+) -> Optional[np.ndarray]:
+    """Draw ``frame`` in ``mode``; ``None`` when there is nothing to draw.
+
+    The mode is resolved through the plan first, so a caller that asks for a view the
+    frame cannot support gets the plan's default rather than a picture assembled from
+    an array that is not there.
+    """
+    plan = plan or plan_image(frame)
+    wanted = plan.resolve(mode)
+    if wanted == DEPTH:
+        # Never substitute another picture for a missing depth map: that made "no
+        # depth" look like a depth reading. The panel says so instead.
+        return depth_map_to_bgr(
+            frame.depth,
+            flow_colormap(theme),
+            value_range=depth_range,
+            invalid_mask=frame.valid_mask,
+        )
+    if frame.image_bgr is None:
+        return None
+    if wanted in (ARROW_PURE, ARROW_STITCHED):
+        if frame.flow is None:
+            # The base picture with no arrows, and the plan's ``missing`` says why.
+            return ensure_bgr(np.asarray(frame.image_bgr))
+        return draw_arrow_display(
+            frame.image_bgr,
+            frame.flow,
+            background="captured" if wanted == ARROW_STITCHED else "pure_color",
+            canvas_bgr=canvas_bgr,
+            draw_style=draw_style,
+            valid_mask=frame.valid_mask,
+            colormap=flow_colormap(theme),
+        )
+    # ``recorded``: the frame is the picture, with nothing drawn over it.
+    return ensure_bgr(np.asarray(frame.image_bgr))

shared/tests/test_image_backend.py

@@ -0,0 +1,192 @@
+"""Acceptance for the single 2D image backend.
+
+The point of this module is that live, recomputed, replayed and previewed frames go
+through *one* renderer and that the view modes come from what the frame carries. These
+tests pin both halves: a plan derived from fields (not from a view preset), and
+pixel-for-pixel agreement with the primitives the application used before.
+"""
+
+from __future__ import annotations
+
+import numpy as np
+import pytest
+
+from orisys_app_shared.acquisition import image_backend as backend
+from orisys_app_shared.acquisition.arrows import (
+    depth_map_to_bgr,
+    draw_arrow_display,
+    flow_colormap,
+)
+
+
+def _image(h: int = 12, w: int = 16) -> np.ndarray:
+    return np.arange(h * w * 3, dtype=np.uint8).reshape(h, w, 3)
+
+
+def _flow(h: int = 12, w: int = 16) -> np.ndarray:
+    flow = np.zeros((h, w, 2), dtype=np.float32)
+    flow[..., 0] = 3.0
+    flow[..., 1] = -1.5
+    return flow
+
+
+# ------------------------------------------------------------------------- plans
+def test_a_live_frame_offers_the_derived_modes_and_needs_no_note():
+    plan = backend.plan_image(
+        backend.ImageFrame(_image(), flow=_flow(), depth=np.ones((12, 16)))
+    )
+    assert plan.available_modes == ("arrows_pure", "arrows_stitched", "depth")
+    assert plan.default_mode == "arrows_pure"
+    assert plan.missing == ()
+    assert plan.note_key == ""
+
+
+def test_a_recorded_frame_is_raw_and_says_so():
+    """No flow and no depth: the frame *is* the picture, and the note explains it."""
+    plan = backend.plan_image(backend.ImageFrame(_image(), source=backend.SOURCE_REPLAY))
+    assert plan.available_modes == ("recorded",)
+    assert plan.default_mode == "recorded"
+    assert plan.missing == ("flow", "depth")
+    assert plan.note_key == backend.RAW_NOTE_KEY
+    assert plan.source == "replay"
+
+
+def test_a_derived_source_keeps_every_mode_and_reports_what_is_missing():
+    """A dropped frame must not silently switch the operator's view.
+
+    Live and recomputed frames may be missing a field for one frame; the mode stays
+    selectable and ``missing`` says which field is absent, so the panel can state it
+    instead of the view looking broken.
+    """
+    flow_only = backend.plan_image(backend.ImageFrame(_image(), flow=_flow()))
+    assert flow_only.available_modes == backend.DERIVED_MODES
+    assert flow_only.missing == ("depth",)
+    assert flow_only.default_mode == "arrows_pure"
+    assert flow_only.note_key == backend.MISSING_NOTE_KEY
+    assert flow_only.note_fields == ("depth",)
+    assert flow_only.needs("depth") == "depth"
+    assert flow_only.needs("arrows_pure") is None
+
+    depth_only = backend.plan_image(backend.ImageFrame(_image(), depth=np.ones((12, 16))))
+    assert depth_only.available_modes == backend.DERIVED_MODES
+    assert depth_only.missing == ("flow",)
+    assert depth_only.default_mode == "depth"
+    assert depth_only.needs("arrows_pure") == "flow"
+
+    complete = backend.plan_image(
+        backend.ImageFrame(_image(), flow=_flow(), depth=np.ones((12, 16)))
+    )
+    assert complete.missing == ()
+    assert complete.note_key == ""
+
+
+def test_a_raw_source_cannot_offer_a_derived_view_at_all():
+    """A recording and a camera preview have no derived field, ever."""
+    for source in (backend.SOURCE_REPLAY, backend.SOURCE_PREVIEW):
+        plan = backend.plan_image(backend.ImageFrame(_image(), source=source))
+        assert plan.available_modes == ("recorded",)
+        assert plan.note_key == backend.RAW_NOTE_KEY
+        assert plan.note_fields == ()
+
+
+def test_the_plan_carries_the_frame_identity_for_the_panel():
+    plan = backend.plan_image(
+        backend.ImageFrame(
+            _image(), source=backend.SOURCE_RECOMPUTE, frame_id=42, t_rel_s=1.25, stale=True
+        )
+    )
+    assert (plan.source, plan.frame_id, plan.t_rel_s, plan.stale) == ("recompute", 42, 1.25, True)
+
+
+def test_a_mode_the_plan_does_not_offer_falls_back_to_the_default():
+    """Never draw a view the source cannot have at all."""
+    recorded = backend.plan_image(
+        backend.ImageFrame(_image(), source=backend.SOURCE_REPLAY)
+    )
+    assert recorded.resolve("arrows_pure") == "recorded"
+    assert recorded.resolve("nonsense") == "recorded"
+    live = backend.plan_image(backend.ImageFrame(_image(), flow=_flow()))
+    assert live.resolve("recorded") == "arrows_pure", "a derived source has no raw mode"
+    assert live.resolve("arrows_stitched") == "arrows_stitched"
+
+
+# --------------------------------------------------------------- one renderer
+def test_the_backend_renders_what_the_primitives_rendered_before():
+    """Live went through these two calls; the backend must not change a pixel."""
+    image = _image()
+    flow = _flow()
+    mask = np.ones((12, 16), dtype=bool)
+    mask[0, 0] = False
+
+    frame = backend.ImageFrame(image, flow=flow, valid_mask=mask)
+    plan = backend.plan_image(frame)
+    for mode in ("arrows_pure", "arrows_stitched"):
+        expected = draw_arrow_display(
+            image,
+            flow,
+            background="captured" if mode == "arrows_stitched" else "pure_color",
+            draw_style="finger",
+            valid_mask=mask,
+        )
+        got = backend.render_image(frame, plan, mode=mode, draw_style="finger")
+        assert np.array_equal(got, expected), mode
+
+    depth = np.linspace(0.0, 1.0, 12 * 16, dtype=np.float32).reshape(12, 16)
+    depth_frame = backend.ImageFrame(image, depth=depth, valid_mask=mask)
+    # The depth picture uses the *theme's* ramp — the same table the panel's colour bar
+    # paints. The window used to leave this argument out, so the map was drawn with
+    # OpenCV's JET while the legend under it showed the brand ramp: two colour tables
+    # for one picture, and the legend claiming they were the same.
+    expected_depth = depth_map_to_bgr(
+        depth, flow_colormap("dark"), value_range=(0.0, 1.0), invalid_mask=mask
+    )
+    got_depth = backend.render_image(
+        depth_frame, mode="depth", depth_range=(0.0, 1.0)
+    )
+    assert np.array_equal(got_depth, expected_depth)
+
+
+def test_a_recorded_frame_is_passed_through_and_never_resized_to_fit():
+    image = _image(9, 7)
+    got = backend.render_image(
+        backend.ImageFrame(image, source=backend.SOURCE_REPLAY), mode="recorded"
+    )
+    assert got is not None and got.shape == image.shape
+    assert np.array_equal(got, image)
+
+
+def test_nothing_to_draw_is_none_not_a_blank_picture():
+    assert backend.render_image(backend.ImageFrame(), mode="recorded") is None
+    assert backend.render_image(
+        backend.ImageFrame(None, flow=_flow()), mode="arrows_pure"
+    ) is None
+    assert backend.render_image(backend.ImageFrame(None, depth=None), mode="depth") is None
+
+
+def test_a_grey_base_frame_is_widened_once_by_the_backend():
+    """A 2-D frame must reach the shader as BGR, and only one place may do it."""
+    grey = np.zeros((8, 6), dtype=np.uint8)
+    got = backend.render_image(backend.ImageFrame(grey), mode="recorded")
+    assert got is not None and got.shape == (8, 6, 3)
+    assert np.array_equal(got, np.stack([grey] * 3, axis=-1))
+
+
+@pytest.mark.parametrize("mode", list(backend.ALL_MODES))
+def test_every_offered_mode_renders_something_or_says_it_cannot(mode):
+    """A mode the plan offers must never come back empty."""
+    frame = backend.ImageFrame(_image(), flow=_flow(), depth=np.ones((12, 16)))
+    plan = backend.plan_image(frame)
+    if not plan.accepts(mode):
+        assert plan.resolve(mode) in plan.available_modes
+        return
+    assert backend.render_image(frame, plan, mode=mode) is not None
+
+
+def test_a_missing_field_is_reported_not_invented():
+    """Depth with no depth says so; arrows with no flow show the base picture."""
+    no_depth = backend.ImageFrame(_image(), flow=_flow())
+    assert backend.render_image(no_depth, mode="depth") is None
+    no_flow = backend.ImageFrame(_image(), depth=np.ones((12, 16)))
+    base = backend.render_image(no_flow, mode="arrows_pure")
+    assert base is not None
+    assert np.array_equal(base, _image()), "the base picture must not be redrawn"