{ "app": { "title": "Orisys Studio", "about_title": "关于", "about_body": "Orisys Studio 桌面应用\n版本: {app_version}", "scaffold_hint": "脚手架界面 — 采集功能稍后加入" }, "brand": { "name": "ORISYS", "tagline": "叠动科技", "nav_live": "实时监测", "nav_live_tip": "当前视图：实时监测。点击可退出历史浏览。", "nav_playback": "历史回放", "nav_playback_tip": "打开一段录制：视频、曲线与同一游标", "nav_calibration": "标定", "nav_calibration_tip": "显示标定面板" }, "menu": { "file": "文件", "open_video": "打开视频…", "reveal_config": "在资源管理器中显示配置…", "playback": "打开录制回放…", "playback_latest": "回放最近一次录制", "view": "视图", "theme": "主题", "theme_dark": "深色", "theme_light": "浅色", "language": "语言", "lang_zh": "简体中文", "lang_en": "English", "calibration_panel": "标定面板", "finger_3d": "手指 3D 视图", "show_fps": "显示 FPS", "settings": "设置区", "plot_settings": "绘图设置…", "rotate_arrows": "旋转箭头图 90°", "recompute": "由视频重算力值", "recompute_tip": "关闭：曲线读录制的 forces.csv（当时测得的值）。打开：把录制的视频重新跑一遍视觉管线（算法复核，只能顺序前进）。", "run": "运行 / 停止", "stop": "取消采集", "preview": "预览 / 停止预览", "reset": "重置追踪器", "help": "帮助", "about": "关于" }, "dialog": { "plot_settings_title": "绘图设置", "plot_window": "时间窗口", "plot_window_tip": "力曲线时间窗口（秒）", "plot_fn_max": "FN 上限", "plot_fn_max_tip": "法向力纵轴上限（牛顿模式）", "plot_shear_max": "剪切上限", "plot_shear_max_tip": "剪切力 FX/FY 纵轴 ±上限（牛顿模式）", "plot_fn_raw_max": "FN 原始上限", "plot_fn_raw_max_tip": "未标定（原始）模式下的法向力纵轴上限。0 = 按数据自动量程；默认值按实测峰值设定，使静止时的抖动在图中不可见", "plot_shear_raw_max": "原始剪切上限", "plot_shear_raw_max_tip": "未标定（原始）模式下的剪切力 FX/FY 纵轴 ±上限。0 = 自动量程", "reset_defaults": "恢复默认", "ok": "确定", "cancel": "取消" }, "toolbar": { "search_cameras": "搜索", "cam_id": "摄像机", "use_camera": "使用摄像机", "use_camera_tip": "回到摄像机采集（当前的数据源是视频文件）", "choose_video": "选择录制视频…", "choose_video_tip": "打开一段录制的视频：2D 面板放视频，曲线读同目录的 forces.csv（原始记录值）", "preview": "预览", "preview_stop": "停止预览", "run": "运行", "stop": "停止", "run_label": "▶ 运行", "stop_label": "■ 停止", "cancel_label": "■ 取消连接", "cancel_tip": "中断连接（连接卡住时随时可用，快捷键 Esc）", "run_unavailable": "当前不可运行", "run_disabled_video": "请先选择一个视频文件", "run_disabled_sensor": "此传感器类型暂不支持运行", "reset": "重置", "units": "单位", "units_newton": "牛顿", "units_raw": "原始", "settings": "设置", "settings_tip": "展开或收起单位、记录模式与预览" }, "units": { "newton_short": "N", "raw_short": "raw" }, "sensor": { "type": "传感器", "config": "传感器配置", "type_tip": "选择产品/传感器：box、mini、finger。它决定可用的配置文件与算法参数。", "config_tip": "该传感器使用的算法配置文件（config/*.json）。切换传感器会同时切换可选配置。", "summary": "{type} · {config}", "dialog_title": "传感器与标定", "dialog_tip": "选择传感器类型与配置文件，并查看当前生效的标定与最近导出的系数", "calib_section": "当前生效的标定", "calib_version": "设备确认的版本", "calib_axes": "已标定轴", "calib_config": "配置", "calib_none": "设备尚未确认加载标定", "export_section": "最近导出的系数", "export_none": "还没有导出过系数", "export_file": "文件 {name}（{size} KB，{time}）", "export_identity": "文件身份 类型 {sensor_type} · SN {sn} · 配置 {config}", "thumb_placeholder": "产品型号" }, "panels": { "arrow": "2D 图像", "view_arrows_pure": "箭头", "view_arrows_stitched": "箭头/采集图像", "view_depth": "深度图", "view_recorded": "原始图像", "view_mode_tip": "运行时的图像显示模式", "replay_pipeline": "录制视频（原始相机图像）", "replay_pipeline_tip": "回放显示的是录制下来的原始相机图像，不含实时箭头叠加；要复核算法请用「视图 → 由视频重算力值」", "replay_empty": "尚未打开录制\n点击下方「打开录制…」", "arrow_empty": "尚未采集图像\n请选择视频或摄像机后点击「运行」", "arrow_empty_tip": "运行或预览后在此显示形变箭头图", "depth_unavailable": "本帧没有深度数据\n（不是深度为零，也未回退显示普通形变图）", "depth_scale": "深度色标 {low} – {high}", "arrow_scale": "箭头按位移放大 ×{factor}", "arrow_scale_tip": "相对位移的显示放大倍率：箭头由原始采集图像经算法输出，长度按测量位移放大后绘制，上限为网格间距的 0.8 倍；触顶的箭头不再呈现真实倍率。", "arrow_pipeline": "原始图像 → 算法输出", "arrow_pipeline_tip": "箭头画在算法输出上，不是相机原始帧：阈值以下的区域不画箭头", "arrow_area_masked": "有效区域", "arrow_area_full": "全画幅", "depth_scale_tip": "本会话固定色标：色标范围锁定在首个有效深度帧，便于跨帧比较；灰色区域表示无深度数据", "plots": "力曲线图", "cal": "标定", "mesh3d": "三维网格", "mesh3d_empty": "手指三维视图占位 —\nOpen3D 网格稍后加入", "mesh3d_empty_tip": "手指传感器的三维网格预览" }, "chart": { "fn": "FN", "fx": "FX", "fy": "FY", "fn_name": "法向力", "fx_name": "切向力 X", "fy_name": "切向力 Y", "window_readout": "{start} – {end} s / 全程 {total} s", "play": "播放", "play_tip": "从游标处按 1× 播放这段录制（空格键）；拖动游标即暂停", "pause": "暂停", "pause_tip": "暂停播放（拖动游标、框选或滚轮也会暂停）", "window_tip": "拖动高亮区域即可移动视窗；这是整段会话的时间轴", "no_data": "—", "mode_follow": "跟随实时", "mode_follow_tip": "曲线跟随最新样本，窗口随采集滚动", "mode_browse": "浏览历史", "mode_browse_tip": "显示暂停，采集与记录继续；拖动或滚轮改变窗口，点「返回最新」回到实时", "mode_replay": "回放录制（浏览）", "mode_replay_tip": "曲线读的是打开的录制；回放期间采集与记录继续", "return_latest": "返回最新", "return_latest_tip": "退出历史浏览，恢复跟随最新数据", "overview": "全程总览", "overview_tip": "把整个会话缩放到一屏；拖动下方总览条可移动视窗", "box_zoom": "框选", "box_zoom_tip": "切换为框选放大（拖动图表框选区域）", "selection": "选区 {duration}s / {samples} 点 — {detail}", "selection_summary": "选区 {duration}s / {samples} 点", "selection_detail": "均 {mean} · σ {std}", "selection_peak_tip": "上方大号数字是选区的峰值；均值为选区均值", "selection_empty": "选区无有效样本", "value_unavailable": "不可用", "value_unavailable_tip": "{channel} 轴未加载标定曲线，因此没有该单位的数值（不会用原始值冒充）", "unit_toggle": "切换单位", "unit_toggle_tip": "点击在「牛顿」与「原始单位」之间切换三轴曲线与读数", "browse_only_tip": "拖动或滚轮即可进入历史浏览" }, "playback": { "title": "录制回放", "open": "打开录制视频…", "video_filter": "录制的视频 (*.mp4 *.avi *.mov *.mkv);;所有文件 (*)", "no_video": "这段录制没有可用的视频分段", "open_failed": "无法打开该录制: {error}", "none_found": "outputs/recordings 下没有找到录制", "frame_dropped": "该帧未被写入视频（记录队列曾溢出）", "frame_unreadable": "该帧无法从视频中解码", "depth_running": "正在重算深度…（在后台线程）", "depth_busy": "上一次重算尚未完成", "depth_empty": "该帧没有深度数据", "depth_failed": "深度重算失败: {detail}", "depth_sdk_unavailable": "无法重算：SDK 不可用", "depth_config_missing": "无法重算：录制未记录传感器配置", "depth_config_file_missing": "无法重算：配置文件的原始路径已不存在", "depth_no_video": "无法重算：该录制没有视频分段", "depth_not_recomputed": "当前游标位置尚未重算深度\n（不会沿用其他帧的结果）", "depth_recomputing": "正在为当前游标位置重算深度…", "depth_frame_not_recorded": "该帧未录制：数据行在队列溢出时丢失，只有索引记录", "depth_frame_not_in_video": "该帧未写入视频，无法重算深度", "depth_state_across_segment": "重算无法跨分段延续算法状态：本段从段首重放", "depth_state_approximate": "本段缺少归零或预卷历史，算法参考状态为近似重建", "depth_warnings": "重算提示: {detail}", "warnings": "回放提示: {detail}", "decimated": "该录制较长，曲线为降采样视图（显示 {shown} / 共 {total} 行；区间数据按需从磁盘读取）", "warn_config_changed": "配置文件与录制时不一致，重算出的深度可能与当时不同", "warn_sdk_changed": "SDK 版本与录制时不一致，重算结果可能不同", "warn_config_missing": "找不到配置哈希，无法校验重算一致性", "warn_depth_recomputed": "深度由离线重算得到，不是当时保存的数据", "warn_rows_skipped": "有无法解析的 CSV 行被跳过", "warn_frames_dropped": "有帧在队列溢出时丢失，仅保留索引记录（回放显示为“该帧未录制”）", "warn_out_of_order": "该录制由旧版本写入，行序不是时间序；回放已按时间重排，区间边界可能与当时不同", "warn_state_across_segment": "重算不能跨分段延续算法状态", "warn_state_approximate": "算法参考状态为近似重建", "warn_state_approximate_after_rewind": "为回到更早的帧重新打开了视频，参考状态可能偏离当时", "warn_state_too_far_back": "归零点过于久远，需要读取的帧数超出上限，已按近似状态重建", "warn_reset_frame_not_indexed": "归零帧不在帧索引中，无法从该点重建状态", "warn_reset_frame_not_in_video": "归零帧未写入视频，无法从该点重建状态", "warn_reset_not_applied": "重放无法重新执行归零，参考状态可能偏离当时" }, "record": { "label": "记录", "mode_video_data": "视频 + 数据", "mode_data_only": "仅数据", "mode_tip": "视频记录的是处理前的相机输入图像（不含箭头与文字叠加）。MP4 是有损封装，不等于无损原始数据。", "start_label": "● 开始记录", "stop_label": "■ 停止记录", "start_tip": "开始记录本实验：视频、力数据与元数据写入同一目录", "stop_tip": "停止记录并写入 session.json（随时可用）", "requires_run": "请先点击「运行」开始采集，再开始记录", "started": "已开始记录（{mode}）", "start_failed": "无法开始记录: {error}", "finished": "记录完成 — {frames} 帧 / {segments} 段，已写入 {path}", "finished_with_problems": "记录完成，但存在问题: {detail}", "closing": "正在关闭记录文件…", "failed_state": "记录已失败（详见摘要与日志）", "alarm": "记录异常: {detail}", "state_idle": "尚未记录", "state_recording": "记录中 {duration}", "state_closing": "正在写入…", "state_error": "写入异常（{count}）", "state_done": "上次记录 {frames} 帧", "dropped": "丢帧 {count}", "strip_idle": "本次会话还没有开始记录", "strip_no_error": "无", "strip_no_path": "尚未创建", "strip_tip": "记录状态: {state}\n帧 {frames} / 分段 {segments} / 时长 {duration}\n丢帧 {dropped}（数据 {dropped_data}、视频 {dropped_video}、空洞 {dropped_gaps}）\n写入错误 {errors}\n最近错误: {detail}\n输出目录 {path}" }, "cal": { "weight": "砝码重量 (N)", "duration": "采集时长", "record": "记录", "recording_stop": "停止", "record_disabled": "请先点击「运行」开始采集，再记录标定样本", "record_cancelled": "已取消本次采集", "empty_hint": "当前通道尚无样本：运行后选择通道并点击「记录」。", "delete_row": "删除行", "clear_channel": "清空通道", "clear_all": "全部清空", "export": "导出系数…", "export_tip": "只写出 SDK 标定系数文件，不改变运行中的设备", "apply": "应用到设备", "apply_tip": "把最近导出的系数下发到运行中的设备（需再次确认）", "apply_no_export": "还没有导出的系数文件，请先「导出系数」", "save_record": "保存标定记录…", "save_record_tip": "保存本次标定会话的全部点与三轴完整采样（审计数据），与系数文件相互独立", "save_record_empty": "还没有标定点，无法保存标定记录", "save_record_ok": "已保存标定记录 {path}\n{points} 个点，共 {samples} 条三轴采样", "save_record_failed": "保存标定记录失败: {error}", "open_record": "打开标定记录…", "open_record_tip": "重新打开已保存的标定会话，检查每个点的完整采样与诊断状态", "open_record_filter": "标定记录 (*.json)", "open_record_ok": "已载入 {path}（{points} 个点）", "open_record_device": "记录设备: {device}", "open_record_warnings": "注意: {detail}", "open_record_failed": "打开标定记录失败: {error}", "apply_mismatch_title": "标定与目标设备不匹配", "apply_mismatch": "该标定文件属于: {device}\n不匹配项: {detail}\n\n当前目标: {sensor_type} / {config}\n\n继续应用会把不适用于本设备的系数写入运行中的设备。", "apply_mismatch_skipped": "已取消应用（标定身份与目标设备不匹配）", "sn": "序列号", "sn_placeholder": "序列号（可选）", "live_raw_label": "实时原始值", "live_raw": "实时原始值 FN={fn} FX={fx} FY={fy}", "col_weight": "参考载荷", "col_fn": "FN 均值", "col_fx": "FX 均值", "col_fy": "FY 均值", "col_stability": "稳定性", "col_state": "状态", "col_raw": "原始均值", "col_n": "n", "col_std": "σ", "state_ok": "正常", "state_excluded": "已排除", "state_validation": "验证点", "state_exclude": "排除", "state_exclude_tip": "把选中点排除出拟合与导出（记录保留，可恢复）", "state_restore": "恢复", "mark_validation": "设为验证点", "mark_validation_tip": "把选中点留作独立验证点：不参与拟合，用于检验拟合", "excluded": "该点已排除出拟合", "restored": "该点已恢复", "marked_validation": "该点已标记为验证点", "unmarked_validation": "该点已取消验证点标记", "fit_insufficient": "拟合需要至少 2 个有效点（当前 {count} 个）", "fit_summary": "导出模型 {channel}: {method}（{count} 点 / {breakpoints} 个折点，最大残差 {residual} N）", "fit_validation": "独立验证 {count} 点，最大偏差 {error} N", "method_piecewise_linear": "分段线性", "method_linear": "线性", "point_title": "标定点 {channel} @ {load} N", "point_channel": "加载轴", "point_direction": "方向", "point_round": "轮次", "point_duration": "实际采样时长", "point_duration_value": "{actual} s（请求 {requested} s）", "point_samples": "样本数", "point_samples_value": "有效 {valid} / 共 {total}", "point_axes": "三轴均值 ± 标准差", "point_residual": "拟合残差", "col_actions": "", "recording": "正在采集标定样本…", "recording_stop_tip": "点击可取消本次标定采集（随时可用）", "record_ok": "已记录 weight={weight} raw={raw}", "record_failed_few": "采集失败 — 样本过少", "export_ok": "已导出 {path}", "export_local": "同时写入 {path}", "export_warnings": "跳过: {detail}", "export_failed": "导出失败: {error}", "export_no_model": "没有可导出的模型: {detail}", "apply_title": "应用标定", "apply_confirm": "将刚导出的标定应用到当前设备？\n\n设备类型: {sensor_type}\n配置: {config}\n\n选择「否」只保留导出文件，不改动运行中的设备。", "apply_skipped": "已导出，未应用到设备", "apply_pending": "已请求把标定应用到 {sensor_type}，等待设备确认…", "applied": "设备已确认标定生效（版本 {version}）", "applied_none": "设备已确认：当前没有加载标定（该项留空）", "export_only": "已导出系数 {path}（未应用到设备）", "apply_no_target": "没有可应用的设备（请先运行一次采集）" }, "status": { "phase_idle": "空闲", "phase_connecting": "连接中", "phase_running": "采集中", "phase_error": "出错", "rail_video_name": "视频文件: {name}", "data_valid": "数据有效", "data_invalid": "无效样本 {count}", "calibrated": "已标定", "calibrated_all": "已标定 · 三轴", "calibrated_axes": "已标定 · {axes}", "uncalibrated": "未标定", "config_none": "未选配置", "camera_none": "未发现摄像机", "camera_found": "发现 {count} 个摄像机: {names}", "preview_started": "预览已启动（摄像机 {camera_id}）", "preview_stopped": "预览已停止", "preview_failed": "预览失败: {error}", "connect_slow": "连接耗时较长，可点击「取消连接」或按 Esc 中断", "run_stopped": "已停止", "run_stopping": "正在停止…（正在释放设备）", "run_stopping_cancelled": "已取消连接（正在释放设备）", "sample_invalid": "采样无效（第 {count} 次）：{reason} — 该样本已标记无效，未计入曲线与标定", "samples_dropped": "记录缓冲已达上限，最早的 {count} 个样本已被释放（全程记录不再完整）", "run_failed": "启动失败: {error}", "video_ended": "视频已结束", "camera_disconnected": "摄像机已断开", "reset_ok": "追踪器已重置", "reset_pending": "已请求归零，等待采集线程确认…", "finger_run_unavailable": "此传感器类型暂不支持运行", "video_required": "请先选择视频文件", "config_missing": "未找到传感器配置: {type}", "units_raw_fallback": "无标定数据 — 显示原始单位", "reveal_failed": "无法打开配置位置: {error}" } }