{
  "app": {
    "title": "Orisys AutoCal Platform Control",
    "about_title": "About Orisys AutoCal",
    "about_body": "Orisys AutoCal — internal controller for the 5-axis calibration platform\nVersion: {app_version}\nShared library: {shared_version} (API {api_version})\n\nQt binding: {binding}\nController library: {dll_dir}\nPreferences: {prefs_path}\n\nInternal use only.",
    "internal_notice": "Internal tool: not shipped in the customer installer."
  },
  "brand": {
    "name": "ORISYS",
    "detail": "Orisys Technology"
  },
  "menu": {
    "file": "File",
    "open_bas": "Download BAS init program…",
    "reveal_config": "Show config in Explorer…",
    "quit": "Quit",
    "view": "View",
    "theme": "Theme",
    "theme_dark": "Dark",
    "theme_light": "Light",
    "language": "Language",
    "lang_zh": "简体中文",
    "lang_en": "English",
    "show_diagnostics": "Diagnostics",
    "tabs": "Workspace",
    "outputs": "Outputs folder",
    "help": "Help",
    "about": "About AutoCal"
  },
  "connection": {
    "title": "Controller connection",
    "mode": "Connection",
    "mode_eth": "Ethernet",
    "mode_com": "Serial",
    "mode_pci": "PCI card",
    "mode_local": "Local / simulated",
    "mode_demo": "Demo (no hardware)",
    "ip": "IP",
    "scan": "Scan IP",
    "com": "COM port",
    "card": "Card",
    "local_string": "Connect string",
    "open": "Connect",
    "close": "Disconnect",
    "status": "Status",
    "state_open": "Connected",
    "state_closed": "Not connected",
    "state_connecting": "Connecting…",
    "source": "Library",
    "no_more": "The 『{mode}』 connection is not available yet."
  },
  "bus": {
    "title": "Bus initialisation",
    "bas_path": "BAS file",
    "choose": "Choose BAS…",
    "download": "Download and initialise",
    "reinit": "Re-initialise",
    "type": "Bus type",
    "type_ecat": "EtherCAT",
    "type_rtex": "RTEX",
    "type_unknown": "Unknown",
    "state": "Init state",
    "state_pending": "Not started",
    "state_running": "Initialising…",
    "state_ok": "Initialised",
    "state_failed": "Initialisation failed",
    "state_timeout": "Initialisation timed out",
    "nodes": "Nodes",
    "axes": "Axes",
    "downloaded": "File downloaded; the controller will scan the bus after its delay",
    "dialog_title": "Choose a BAS file"
  },
  "axes": {
    "title": "Axis motion",
    "axis": "Axis",
    "enable": "Enable",
    "enable_on": "Enabled",
    "enable_off": "Disabled",
    "atype": "Type",
    "units": "Units",
    "speed": "Speed",
    "accel": "Accel",
    "dpos": "DPOS",
    "mpos": "MPOS",
    "dpos_mm": "DPOS (mm)",
    "mpos_mm": "MPOS (mm)",
    "status": "Status",
    "motion": "Motion",
    "motion_word": "Motion",
    "idle": "Stopped",
    "moving": "Moving",
    "position_pair": "{value} ({mm} mm)",
    "enable_all": "Enable all",
    "disable_all": "Disable all",
    "clear_alarm_all": "Clear all alarms",
    "detail": "Axis {axis}: type {atype} · accel {accel} · feedback {mpos} ({mpos_mm} mm) · status {status} · {home}",
    "detail_none": "Axis {axis}: no data yet (not connected or not initialised)",
    "home_status": "Homing",
    "home_ok": "Homed",
    "home_pending": "Not homed",
    "home_running": "Homing…",
    "jog_fwd": "Fwd",
    "jog_rev": "Rev",
    "stop_all": "Stop all",
    "stop": "Stop",
    "target": "Target",
    "move_abs": "Move abs",
    "move_rel": "Move rel",
    "home_mode": "Home mode",
    "home_high": "Home speed",
    "home_low": "Home creep",
    "home_offset": "Home offset",
    "clear_alarm": "Clear alarm",
    "apply": "Apply",
    "home": "Home",
    "controls": "Actions",
    "mm_derived_tip": "Millimetres are derived from the pulse equivalent: a display value, not a calibrated length.",
    "enabled_count": "{on}/{total} axes enabled"
  },
  "busdata": {
    "title": "Bus data exchange",
    "group": "Bus data (SDO / RTEX)",
    "ecat": "EtherCAT (SDO)",
    "rtex": "RTEX",
    "node": "Node",
    "index": "Index",
    "subindex": "Subindex",
    "type": "Type",
    "value": "Value",
    "read": "Read",
    "write": "Write",
    "axis": "Axis",
    "parameter": "Parameter",
    "last_result": "Last: {text}",
    "not_available": "The current bus does not support this",
    "read_ok": "Read: {value}",
    "write_ok": "Written"
  },
  "status": {
    "motion": "Motion",
    "ready": "Ready",
    "poll_ok": "State refresh healthy",
    "poll_paused": "State refresh paused",
    "poll_stalled": "State refresh stalled",
    "last_error": "Last error",
    "none": "None",
    "refused": "Refused",
    "done": "Done",
    "failed": "Failed",
    "pause": "Pause refresh",
    "resume": "Resume refresh",
    "paused": "State refresh paused",
    "alarm_short": "Alarm",
    "axes_enabled": "{on}/{total} axes enabled",
    "health_none": "Refresh —",
    "health_age": "Read {ms} ms ago",
    "health_paused": "Refresh paused",
    "poll_every": "Refresh every {ms} ms"
  },
  "run": {
    "title": "Run",
    "phase_idle": "Idle",
    "phase_dry_run": "Dry run",
    "phase_running": "Running",
    "phase_paused": "Paused",
    "phase_done": "Done",
    "phase_failed": "Failed",
    "step_of": "Point {done}/{total}",
    "no_steps": "No points generated",
    "elapsed_only": "Elapsed {elapsed}",
    "elapsed_remaining": "Elapsed {elapsed} · about {remaining} left",
    "run": "Run",
    "pause": "Pause",
    "abort": "Abort",
    "abort_stopped": "Run aborted and all axes stopped.",
    "not_implemented": "The runner belongs to phase P7 and is not implemented yet; abort is always available."
  },
  "readout": {
    "title": "Axis state"
  },
  "workspace": {
    "tab_axes": "Axis debug",
    "tab_sequence": "Test sequence",
    "tab_sensor": "Sensor",
    "tab_surface": "Surface map",
    "tab_points": "Calibration points",
    "not_built": "Not built yet",
    "reserved_sensor": "Sensor connection, live image and force curves will appear here: device and source selection, preview, and a compact version of the Studio curve view.",
    "reserved_surface": "Multi-point calibration sensitivity will be drawn as a colour map on the sensor's 3D surface here: each point's sensitivity interpolated and coloured, with a legend and range.",
    "reserved_points": "The calibration point table and capture controls will appear here: platform coordinates, reference load, sampling statistics and the resulting sensitivity."
  },
  "sequence": {
    "title": "Test sequence design",
    "profile_title": "Point generation",
    "preview_title": "Preview",
    "validation_title": "Checks",
    "points_title": "Calibration points",
    "field_mode": "Surface mode",
    "field_name": "Sequence name",
    "field_note": "Note",
    "field_pitch": "Pitch (mm)",
    "field_margin": "Margin (mm)",
    "field_radius": "Radius (mm)",
    "field_clear_height": "Clear height (mm)",
    "field_approach_speed": "Approach speed (mm/s)",
    "field_press_speed": "Press speed (mm/s)",
    "field_press_depth": "Press depth (mm)",
    "field_dwell": "Dwell (s)",
    "field_settle": "Settle window (s)",
    "field_repeats": "Repeats",
    "field_order": "Point order",
    "mode_flat": "Flat",
    "mode_curved": "Curved",
    "order_row": "Row-wise",
    "order_serpentine": "Serpentine",
    "order_distance": "By distance",
    "preview_placeholder": "3D preview: sensor surface · calibration points · visiting order\n(implemented in the simulation phase)",
    "preview_hint": "After generation, check here that each point is on the surface, inside travel, and confirmable by contact.",
    "validation_pending": "No points generated yet.",
    "check_on_surface": "On the surface",
    "check_within_travel": "Within travel",
    "check_contact_confirmable": "Contact confirmable",
    "btn_generate": "Generate points",
    "btn_simulate": "Simulate",
    "btn_dry_run": "Dry run (no contact)",
    "btn_export": "Export sequence…",
    "btn_import": "Import sequence…",
    "import_export_tip": "Saved as a JSON document (.oryseq), reusable across machines; the format version is checked on import.",
    "export_failed": "Export failed: {error}",
    "import_failed": "Import failed: {error}",
    "pending_tooltip": "This belongs to phase {phase} and is not implemented yet.",
    "col_index": "#",
    "col_x": "X (mm)",
    "col_y": "Y (mm)",
    "col_z": "Z (mm)",
    "col_status": "Status",
    "col_sensitivity": "Sensitivity (last)",
    "col_samples": "Samples",
    "col_actions": "Actions",
    "not_generated": "—",
    "status_pending": "Pending",
    "status_skipped": "Skipped",
    "summary": "{count} points ({enabled} enabled) · {spans} · about {duration} (estimate)",
    "summary_empty": "No points yet: generate or import to see the count and travel span.",
    "dialog_export": "Export sequence",
    "dialog_import": "Import sequence",
    "filter_sequence": "Calibration sequence (*.oryseq *.json)",
    "exported": "Sequence exported: {name}",
    "imported": "Sequence imported: {name} ({count} points)",
    "import_warnings": "Import reported {count} warning(s)",
    "confirm_discard": "The current sequence has not been exported. Importing replaces it. Continue?",
    "points_hint": "Coordinates are generated and checked per point; they are not typed. A typed coordinate is one nothing has checked, and one wrong number ruins a run."
  },
  "action": {
    "ok": "Done",
    "refused": "Refused",
    "failed": "Failed"
  },
  "diagnostics": {
    "title": "Diagnostics",
    "binding": "Qt binding",
    "dll_dir": "Controller library",
    "prefs": "Preferences",
    "outputs": "Outputs",
    "bas_loaded": "BAS loaded",
    "yes": "Yes",
    "no": "No"
  }
}