ykcheungab
92da51217c
Phase 2 of the review: browse the whole session instead of only the rolling window, diagnose a calibration from the recorded points, and provide the reviewed two-panel layout. What - SessionStore gains extent(), visible(t0, t1, max_points) and statistics(t0, t1, unit). visible() walks only the blocks that overlap the window and decimates by taking each bucket's minimum and maximum, so a spike survives decimation and browsing a long session does not copy all of it. - ForcePlotsPanel gains follow/browse modes, a whole-session overview strip with the current window, pan and wheel zoom, a rubber-band zoom toggle, a shared time cursor across all three channels, and a selection readout (duration, valid samples, per-axis peak/mean/std). - CalibrationPoint records a bounded per-axis trace, an excluded flag, a validation flag and its fit residual. CalibrationRecorder gains set_excluded/set_validation/fit; the fit is a least-squares line over the non-excluded, non-validation points with per-point residuals and an independent validation error. - The calibration table becomes the reviewed diagnostic view (reference load | FN | FX | FY | stability | state) with the residual shown next to the loaded axis, plus exclude/restore and mark-validation actions and a fit summary line. Double clicking a row opens the point's three-axis trace. - Add a layout preset: free layout or 2D mode (depth map on the left, force charts on the right, calibration folded away), persisted in preferences. Why - Browsing is a display pause, not a capture pause: the record channel keeps running while the charts show an older window. - Excluding a point removes it from the fit and from the exported calibration but keeps it on record, so the evidence for the decision is not destroyed. - The non-loaded axes are recorded but never given a reference load: their true load is unknown during a single-axis calibration, so it stays empty. Verification - shared/tests/test_record_channel.py grows to 18 cases, covering extent, peak-preserving decimation, windowed reads, inverted/empty windows, unit-aware statistics and the time origin. - tools/ui_check.py gains "session browsing" and "layout preset" sections (223 checks, 0 failures overall). - apps/studio/tests/test_ui_smoke.py covers the same invariants. Not in this change: synchronised playback of video, depth and curves. It needs a decision on how depth is stored for replay (per-frame PNG, reduced-rate PNG, or offline recomputation); the cursor plumbing (cursor_moved / set_cursor) is already in place for it.
234 lines
9.9 KiB
JSON
234 lines
9.9 KiB
JSON
{
|
||
"app": {
|
||
"title": "Orisys Studio",
|
||
"about_title": "关于",
|
||
"about_body": "Orisys Studio 桌面应用\n版本: {app_version}",
|
||
"scaffold_hint": "脚手架界面 — 采集功能稍后加入"
|
||
},
|
||
"brand": {
|
||
"name": "ORISYS",
|
||
"tagline": "叠动科技"
|
||
},
|
||
"menu": {
|
||
"file": "文件",
|
||
"open_video": "打开视频…",
|
||
"reveal_config": "在资源管理器中显示配置…",
|
||
"view": "视图",
|
||
"theme": "主题",
|
||
"theme_dark": "深色",
|
||
"theme_light": "浅色",
|
||
"language": "语言",
|
||
"lang_zh": "简体中文",
|
||
"lang_en": "English",
|
||
"calibration_panel": "标定面板",
|
||
"finger_3d": "手指 3D 视图",
|
||
"show_fps": "显示 FPS",
|
||
"plot_settings": "绘图设置…",
|
||
"rotate_arrows": "旋转箭头图 90°",
|
||
"run": "运行 / 停止",
|
||
"stop": "取消采集",
|
||
"preview": "预览 / 停止预览",
|
||
"reset": "重置追踪器",
|
||
"help": "帮助",
|
||
"about": "关于"
|
||
},
|
||
"dialog": {
|
||
"plot_settings_title": "绘图设置",
|
||
"plot_window": "时间窗口",
|
||
"plot_window_tip": "力曲线时间窗口（秒）",
|
||
"plot_fn_max": "FN 上限",
|
||
"plot_fn_max_tip": "法向力纵轴上限（牛顿模式）",
|
||
"plot_shear_max": "剪切上限",
|
||
"plot_shear_max_tip": "剪切力 FX/FY 纵轴 ±上限（牛顿模式）",
|
||
"plot_fn_raw_max": "FN 原始上限",
|
||
"plot_fn_raw_max_tip": "未标定（原始）模式下的法向力纵轴上限。0 = 按数据自动量程；默认值按实测峰值设定，使静止时的抖动在图中不可见",
|
||
"plot_shear_raw_max": "原始剪切上限",
|
||
"plot_shear_raw_max_tip": "未标定（原始）模式下的剪切力 FX/FY 纵轴 ±上限。0 = 自动量程",
|
||
"reset_defaults": "恢复默认",
|
||
"ok": "确定",
|
||
"cancel": "取消"
|
||
},
|
||
"toolbar": {
|
||
"source": "来源",
|
||
"source_camera": "摄像机",
|
||
"source_video": "视频文件",
|
||
"search_cameras": "搜索",
|
||
"cam_id": "摄像机",
|
||
"browse_video": "浏览…",
|
||
"video_placeholder": "未选择视频",
|
||
"preview": "预览",
|
||
"preview_stop": "停止预览",
|
||
"run": "运行",
|
||
"stop": "停止",
|
||
"run_label": "▶ 运行",
|
||
"stop_label": "■ 停止",
|
||
"cancel_label": "■ 取消连接",
|
||
"cancel_tip": "中断连接（连接卡住时随时可用，快捷键 Esc）",
|
||
"run_unavailable": "当前不可运行",
|
||
"run_disabled_video": "请先选择一个视频文件",
|
||
"run_disabled_sensor": "此传感器类型暂不支持运行",
|
||
"reset": "重置",
|
||
"units": "单位",
|
||
"units_newton": "牛顿",
|
||
"units_raw": "原始"
|
||
},
|
||
"units": {
|
||
"newton_short": "N",
|
||
"raw_short": "raw"
|
||
},
|
||
"sensor": {
|
||
"type": "产品",
|
||
"config": "配置",
|
||
"thumb_placeholder": "产品型号"
|
||
},
|
||
"panels": {
|
||
"arrow": "形变箭头",
|
||
"view_arrows_pure": "箭头",
|
||
"view_arrows_stitched": "箭头/采集图像",
|
||
"view_depth": "深度图",
|
||
"view_mode_tip": "运行时的图像显示模式",
|
||
"arrow_empty": "尚未采集图像\n请选择视频或摄像机后点击「运行」",
|
||
"arrow_empty_tip": "运行或预览后在此显示形变箭头图",
|
||
"depth_unavailable": "本帧没有深度数据\n（不是深度为零，也未回退显示普通形变图）",
|
||
"depth_scale": "深度色标 {low} – {high}",
|
||
"depth_scale_tip": "本会话固定色标：色标范围锁定在首个有效深度帧，便于跨帧比较；灰色区域表示无深度数据",
|
||
"plots": "力曲线图",
|
||
"cal": "标定",
|
||
"mesh3d": "三维网格",
|
||
"mesh3d_empty": "手指三维视图占位 —\nOpen3D 网格稍后加入",
|
||
"mesh3d_empty_tip": "手指传感器的三维网格预览"
|
||
},
|
||
"chart": {
|
||
"fn": "FN",
|
||
"fx": "FX",
|
||
"fy": "FY",
|
||
"no_data": "—",
|
||
"mode_follow": "跟随实时",
|
||
"mode_browse": "浏览历史（显示暂停，采集与记录继续）",
|
||
"return_latest": "返回最新",
|
||
"return_latest_tip": "退出历史浏览，恢复跟随最新数据",
|
||
"overview": "全程总览",
|
||
"overview_tip": "把整个会话缩放到一屏；拖动下方总览条可移动视窗",
|
||
"box_zoom": "框选",
|
||
"box_zoom_tip": "切换为框选放大（拖动图表框选区域）",
|
||
"selection": "选区 {duration}s / {samples} 点 — {detail}",
|
||
"selection_empty": "选区无有效样本",
|
||
"browse_only_tip": "拖动或滚轮即可进入历史浏览"
|
||
},
|
||
"layout": {
|
||
"default": "自由布局",
|
||
"preset_2d_name": "二维模式（深度图 + 曲线）",
|
||
"preset_2d": "已切换到二维模式：左侧深度图、右侧三轴曲线，共用时间轴",
|
||
"preset_default": "已恢复自由布局"
|
||
},
|
||
"record": { "label": "记录",
|
||
"mode_video_data": "视频 + 数据",
|
||
"mode_data_only": "仅数据",
|
||
"mode_tip": "视频记录的是处理前的相机输入图像（不含箭头与文字叠加）。MP4 是有损封装，不等于无损原始数据。",
|
||
"start_label": "● 开始记录",
|
||
"stop_label": "■ 停止记录",
|
||
"start_tip": "开始记录本实验：视频、力数据与元数据写入同一目录",
|
||
"stop_tip": "停止记录并写入 session.json（随时可用）",
|
||
"requires_run": "请先点击「运行」开始采集，再开始记录",
|
||
"started": "已开始记录（{mode}）",
|
||
"start_failed": "无法开始记录: {error}",
|
||
"finished": "记录完成 — {frames} 帧 / {segments} 段，已写入 {path}",
|
||
"finished_with_problems": "记录完成，但存在问题: {detail}",
|
||
"alarm": "记录异常: {detail}"
|
||
},
|
||
"cal": {
|
||
"weight": "砝码重量 (N)",
|
||
"duration": "采集时长",
|
||
"record": "记录",
|
||
"recording_stop": "停止",
|
||
"record_disabled": "请先点击「运行」开始采集，再记录标定样本",
|
||
"record_cancelled": "已取消本次采集",
|
||
"empty_hint": "当前通道尚无样本：运行后选择通道并点击「记录」。",
|
||
"delete_row": "删除行",
|
||
"clear_channel": "清空通道",
|
||
"clear_all": "全部清空",
|
||
"export": "导出…",
|
||
"sn": "序列号",
|
||
"sn_placeholder": "序列号（可选）",
|
||
"live_raw_label": "实时原始值",
|
||
"live_raw": "实时原始值 FN={fn} FX={fx} FY={fy}",
|
||
"col_weight": "参考载荷",
|
||
"col_fn": "FN 均值",
|
||
"col_fx": "FX 均值",
|
||
"col_fy": "FY 均值",
|
||
"col_stability": "稳定性",
|
||
"col_state": "状态",
|
||
"col_raw": "原始均值",
|
||
"col_n": "n",
|
||
"col_std": "σ",
|
||
"state_ok": "正常",
|
||
"state_excluded": "已排除",
|
||
"state_validation": "验证点",
|
||
"state_exclude": "排除",
|
||
"state_exclude_tip": "把选中点排除出拟合与导出（记录保留，可恢复）",
|
||
"state_restore": "恢复",
|
||
"mark_validation": "设为验证点",
|
||
"mark_validation_tip": "把选中点留作独立验证点：不参与拟合，用于检验拟合",
|
||
"excluded": "该点已排除出拟合",
|
||
"restored": "该点已恢复",
|
||
"marked_validation": "该点已标记为验证点",
|
||
"unmarked_validation": "该点已取消验证点标记",
|
||
"fit_insufficient": "拟合需要至少 2 个有效点（当前 {count} 个）",
|
||
"fit_summary": "拟合 {channel}: N = {gain} × raw + {offset}（{count} 点，最大残差 {residual} N）",
|
||
"fit_validation": "独立验证 {count} 点，最大偏差 {error} N",
|
||
"point_title": "标定点 {channel} @ {load} N",
|
||
"point_channel": "加载轴",
|
||
"point_direction": "方向",
|
||
"point_round": "轮次",
|
||
"point_duration": "实际采样时长",
|
||
"point_duration_value": "{actual} s（请求 {requested} s）",
|
||
"point_samples": "样本数",
|
||
"point_samples_value": "有效 {valid} / 共 {total}",
|
||
"point_axes": "三轴均值 ± 标准差",
|
||
"point_residual": "拟合残差",
|
||
"col_actions": "",
|
||
"recording": "正在采集标定样本…",
|
||
"recording_stop_tip": "点击可取消本次标定采集（随时可用）",
|
||
"record_ok": "已记录 weight={weight} raw={raw}",
|
||
"record_failed_few": "采集失败 — 样本过少",
|
||
"export_ok": "已导出 {path}",
|
||
"export_local": "同时写入 {path}",
|
||
"export_warnings": "跳过: {detail}",
|
||
"export_failed": "导出失败: {error}",
|
||
"apply_title": "应用标定",
|
||
"apply_confirm": "将刚导出的标定应用到当前设备？\n\n设备类型: {sensor_type}\n配置: {config}\n\n选择「否」只保留导出文件，不改动运行中的设备。",
|
||
"apply_skipped": "已导出，未应用到设备",
|
||
"apply_done": "标定已应用到 {sensor_type}",
|
||
"apply_no_target": "没有可应用的设备（请先运行一次采集）"
|
||
},
|
||
"status": {
|
||
"ready": "就绪",
|
||
"phase_idle": "空闲",
|
||
"phase_connecting": "连接中",
|
||
"phase_running": "运行中",
|
||
"phase_error": "出错",
|
||
"camera_none": "未发现摄像机",
|
||
"camera_found": "发现 {count} 个摄像机: {names}",
|
||
"preview_started": "预览已启动（摄像机 {camera_id}）",
|
||
"preview_stopped": "预览已停止",
|
||
"preview_failed": "预览失败: {error}",
|
||
"connecting": "正在连接…",
|
||
"connect_slow": "连接耗时较长，可点击「取消连接」或按 Esc 中断",
|
||
"run_started": "运行中（{source}）",
|
||
"run_stopped": "已停止",
|
||
"run_stopping": "正在停止…（正在释放设备）",
|
||
"run_stopping_cancelled": "已取消连接（正在释放设备）",
|
||
"sample_invalid": "采样无效（第 {count} 次）：{reason} — 该样本已标记无效，未计入曲线与标定",
|
||
"samples_dropped": "记录缓冲已达上限，最早的 {count} 个样本已被释放（全程记录不再完整）",
|
||
"run_failed": "启动失败: {error}",
|
||
"video_ended": "视频已结束",
|
||
"camera_disconnected": "摄像机已断开",
|
||
"reset_ok": "追踪器已重置",
|
||
"finger_run_unavailable": "此传感器类型暂不支持运行",
|
||
"video_required": "请先选择视频文件",
|
||
"config_missing": "未找到传感器配置: {type}",
|
||
"units_raw_fallback": "无标定数据 — 显示原始单位",
|
||
"reveal_failed": "无法打开配置位置: {error}"
|
||
}
|
||
}
|