fix cli redundant images

finger-xynova first design completed

sensors/finger-xynova/r01/design.yaml

@@ -52,6 +52,59 @@ texture_patch:
     thickness_px: 3
     color: [1.0, 0.0, 0.0, 1.0]   # red reference cross
 
+# Multi-view production textures (`orisys-design texture-views`).
+#
+# `cam_uv_1` / `cam_uv_2` already existed in this blend; `uv_1` / `uv_2` and the seam were
+# added to `sensing_surface`. Verified: the marked seam is a valid cut — 45 edges splitting
+# the surface into 2 components of 308.314 / 308.311 mm^2 (50.0 / 50.0) — and at the default
+# 62 degree limit the partition leaves 0.100 mm^2 of hole (fraction 0.0002), well inside
+# max_hole_fraction. Coverage: 4960/5007 triangles owned, 20454 + 21483 fragments emitted.
+#
+# NOTE: this revision contains SIX sensing-surface variants (`sensing_surface`, `_0`, `_0918`,
+# `_0928`, `_45`, `_918_s`). `_0928` is the only one carrying the seam and `uv_1`/`uv_2`, so
+# `sensing_surface` is a copy of it. Two consequences to be aware of:
+#   1. `_0928` is a COINCIDENT duplicate of `sensing_surface` at identical coordinates. The
+#      `EXCLUDE` collection has `exclude=False`, so it is not actually excluded from the view
+#      layer, and the raycast hits the duplicate instead of the target. That rejects every
+#      fragment and the region cameras return 0 — `texture-views` now fails loudly and names
+#      the intercepting object rather than writing blank textures. `_0928` is hidden.
+#   2. The probe/render baseline (`build/probe/finger-xynova/r01/probe_frames.npz`) was built
+#      from the 2508-vertex `sensing_surface_918_s`, while `sensing_surface` has 2584 vertices.
+#      `tests/test_render.py::test_end_to_end_render_manifest` therefore fails on the vertex
+#      count. That is a fixture/stale-baseline mismatch, not a texture bug: either regenerate
+#      the probe frames for the current surface, or author the seam and the extra UV layouts
+#      on whichever surface is canonical. `expected.*` below would have caught this and is
+#      still read by nothing.
+texture_patch_views:
+  enabled: true
+  pattern_camera: cam_sensor     # the pattern every layout carries, same source as `compute`
+  pairs:
+    - id: uv_1
+      camera: cam_uv_1           # REGION camera
+      uv_map: uv_1
+    - id: uv_2
+      camera: cam_uv_2
+      uv_map: uv_2
+  merge:
+    mode: authored               # honour the 45-edge seam marked on the mesh
+    incidence_limit_deg: 62.0    # measured on this part: hole fraction 0.0002 at 62 deg
+    min_footprint_mm2: 2.0e-3
+    min_triangle_coverage: 0.60
+    max_hole_fraction: 0.02
+    component_policy: best_coverage
+  seam:
+    boundary: use_seam
+    pins: []
+    # Empty band along the seam, to absorb two-pass registration error. Default total width is
+    # 2 x alignment_tolerance_mm = 0.2 mm, half per file; `total_mm` overrides the derivation.
+    gap:
+      enabled: false                # false = hard butt at the seam, no band at all
+      apply: post_process          # post_process = straight edge | geometry_trim = sawtooth
+      treatment: no_print          # the band carries nothing
+      alignment_tolerance_mm: 0.1  # per-pass placement accuracy, mm
+  print:
+    base_fill: owned             # white ground, clipped by the seam
+
 # Post-generation printability inspection (`orisys-design inspect`). Advisory
 # only: it reports a verdict but never blocks generation or changes exit codes.
 # Millimetres are measured on the vector page declared above.