sensor: finger
revision: r01
status: experimental

# Authoring unit in Blender (mm). Export converts using meters_per_source_unit.
authoring_unit: mm
meters_per_source_unit: 0.001

source_blend: source/geometry.blend

# Expected sensing surface topology for r01 (from shipped 30fps-0703 runtime).
# First exports from geometry.blend may differ until topology is locked.
expected:
  sensing_vertices: 1032
  sensing_triangles: 1974

frames:
  sensor: origin_sensor

objects:
  sensing_surface: sensing_surface
  cam_sensor: cam_sensor
  origin_sensor: origin_sensor

# Headless colored-patch texture generation (`orisys-design texture`).
# UV unwrapping is still done in the Blender GUI: the headless run consumes the
# UV maps already stored in source_blend and never creates or unwraps one.
# One PNG/SVG/PDF set is written per UV map below. All maps and formats share
# the settings and patch colours, so they differ only by UV layout.
# These are the revision defaults; CLI flags override every value.
texture_patch:
  mesh: sensing_surface
  camera: cam_sensor
  uv_outputs:
    produce: patch_texture_produce.png   # hardware production layout
    compute: patch_texture_compute.png   # compute/runtime layout
  width: 3280            # 1640*2
  height: 3200           # 1600*2
  nx: 80
  ny: 45
  color_r: 0.05
  edge_sample_grid: 5
  seed: 7                # fixed so PNG/SVG/PDF share one reproducible colour set
  vector:
    width_mm: 16.4        # editable SVG/PDF production page width
    height_mm: 16.0       # editable SVG/PDF production page height
  cross:
    enabled: true
    length_px: 40
    thickness_px: 3
    color: [1.0, 0.0, 0.0, 1.0]   # red reference cross

# Post-generation printability inspection (`orisys-design inspect`). Advisory
# only: it reports a verdict but never blocks generation or changes exit codes.
# Millimetres are measured on the vector page declared above.
printability:
  printer_dpi: 600          # target UV printer resolution
  min_dots: 2               # printer dots required across the smallest feature
  min_feature_mm: 0.10      # smallest acceptable feature width
  min_edge_mm: 0.05         # shortest acceptable polygon edge
  max_sliver_ratio: 4.0     # longest edge / minimum width
  min_patch_area_mm2: 1.0e-4  # area above which a polygon is a material feature

collections:
  frames: FRAMES
  export_compute: EXPORT_COMPUTE
  assembly: ASSEMBLY
  design_sim: DESIGN_SIM
  exclude: EXCLUDE

notes: |
  Canonical source is geometry.blend with named collections and objects.
  Compute export uses sensing_surface + cam_sensor relative to origin_sensor.
  Studio observation cameras are derived from mesh bounds; no cam_viz required.