缩短两份超限文档,去掉重复内容

replay-panel.md 超出 general 上限 5、shell-lifecycle.md 超出 reference 上限 27。两者超的都是重复:前者的「手动清空/退出清空/导出无代码」在缓存一节已写过,后者重复解释了同一条症状并删掉了已被修复解决的括注。

验证:doc_count 显示 1482/1500 与 3593/3599;doc_lint changed 与 --all 均干净。
This commit is contained in:
ykcheungab
2026-10-06 14:27:53 +08:00
parent d11441cd79
commit a4313f300d
2 changed files with 5 additions and 7 deletions
-2
View File
@@ -171,8 +171,6 @@ wipe-on-exit preference and result export (≈70 MB per ten minutes).
* The render cost (≈1.4 ms) and the PNG estimate (180–540 MB per ten minutes) are the owner's
bench; Part B §14's snapshots (4.2–4.9 kB each) suggest the estimate is high.
* The manual clear action, the wipe-on-exit preference and result export have no code in
`orisys-app`; they are decisions.
* A chosen calibration can be applied to the **box** chain only (`Sensor(cal_path=…)`). The
finger runtime opens its sensor without one, so a non-default curve for a finger profile is
refused rather than silently ignored — the SDK has no entry point for it (reported, not
+5 -5
View File
@@ -86,20 +86,20 @@
(`ForcePlotsPanel.timeline_taken_over` → `_pause_playback`)。空格键同效。没有独立进度条,
曲线表头也不再放第二个播放按钮(一个运输控制,不会两处打架)。
- **视频解码器常开**:`RecordingReader.video_frame_at` 以前每帧 `VideoCapture` 重开 + seek
(小片段 10 ms,1080p H.264 上百 ms),30 fps 播放时每一拍都卡在 UI 线程上,视频看起来
根本不动。现在按分段缓存一个解码器,**顺序帧用 `read()` 步进**(实测 0.5 ms/帧),
(小片段 10 ms,1080p H.264 上百 ms),30 fps 播放时每一拍都卡在 UI 线程上,视频根本
不动。现在按分段缓存一个解码器,**顺序帧用 `read()` 步进**(实测 0.5 ms/帧),
跳转才 seek,`RecordingReader.close()` 负责释放。
- **数值卡读游标处的那一帧**(`ForcePlotsPanel._readout_at_cursor`)。浏览历史或回放时,
三个大数字是播放头所指的样本;跟随实时时"最新样本就是游标",不额外读盘。旧写法在回放
时显示实时采集的最后一个样本,于是一张 7.5e5 原始计数的曲线旁边写着实时的 `0.0`。
- **2D 面板归当前视图的来源所有**(`_replay_owns_image()`):回放视图打开录制后,采集线程
仍然在跑,但 `_on_run_tick` / `_on_preview_tick` 不再把实时帧画进 2D 面板,
`_render_run_image` 直接返回。否则回放画面会被摄像头帧一帧一帧盖掉("回放时好像用的是
摄像头")。切回实时视图才把面板交还给实时帧。
`_render_run_image` 直接返回,否则回放画面会被摄像头帧一帧一帧盖掉。切回实时视图才把
面板交还给实时帧。
- **回放提示不占位置**:降采样 / 跨版本等说明放在来源摘要的 tooltip 里(状态栏只留一次性
通知,见 §2.2),打开录制时另发一条 6 秒通知。
- 离开回放视图:曲线挂回实时 store 并恢复跟随,来源槽换回摄像机,**已打开的录制保留**,
摘要里的视频名**不再出现**(这正是"视频文件名残留在实时检测里"的修法)。
摘要里的视频名**不再出现**。
- 文件菜单两条入口(`打开录制视频…` / `回放最近一次录制`)都只是切到回放视图并加载录制。
### 2.1 「由视频重算」:与打开录像同一条分析入口