orisys-app/apps/studio/config/locales/zh_CN.json

{
  "app": {
    "title": "Orisys Studio",
    "about_title": "关于",
    "about_body": "Orisys Studio 桌面应用\n版本: {app_version}",
    "scaffold_hint": "脚手架界面 — 采集功能稍后加入"
  },
  "brand": {
    "name": "ORISYS",
    "tagline": "叠动科技",
    "nav_live": "实时监测",
    "nav_live_tip": "当前视图：实时监测。点击可退出历史浏览。",
    "nav_playback": "历史回放",
    "nav_playback_tip": "打开一段录制：视频、曲线与同一游标",
    "nav_calibration": "标定",
    "nav_calibration_tip": "显示标定面板"
  },
  "menu": {
    "file": "文件",
    "open_video": "打开视频…",
    "reveal_config": "在资源管理器中显示配置…",
    "playback": "打开录制回放…",
    "playback_latest": "回放最近一次录制",
    "view": "视图",
    "theme": "主题",
    "theme_dark": "深色",
    "theme_light": "浅色",
    "language": "语言",
    "lang_zh": "简体中文",
    "lang_en": "English",
    "calibration_panel": "标定面板",
    "finger_3d": "手指 3D 视图",
    "show_fps": "显示 FPS",
    "settings": "设置区",
    "plot_settings": "绘图设置…",
    "rotate_arrows": "旋转箭头图 90°",
    "recompute": "由视频重算力值",
    "recompute_tip": "关闭：曲线读录制的 forces.csv（当时测得的值）。打开：把录制的视频重新跑一遍视觉管线（算法复核，只能顺序前进）。",
    "run": "运行 / 停止",
    "stop": "取消采集",
    "preview": "预览 / 停止预览",
    "reset": "重置追踪器",
    "help": "帮助",
    "about": "关于"
  },
  "dialog": {
    "plot_settings_title": "绘图设置",
    "plot_window": "时间窗口",
    "plot_window_tip": "力曲线时间窗口（秒）",
    "plot_fn_max": "FN 上限",
    "plot_fn_max_tip": "法向力纵轴上限（牛顿模式）",
    "plot_shear_max": "剪切上限",
    "plot_shear_max_tip": "剪切力 FX/FY 纵轴 ±上限（牛顿模式）",
    "plot_fn_raw_max": "FN 原始上限",
    "plot_fn_raw_max_tip": "未标定（原始）模式下的法向力纵轴上限。0 = 按数据自动量程；默认值按实测峰值设定，使静止时的抖动在图中不可见",
    "plot_shear_raw_max": "原始剪切上限",
    "plot_shear_raw_max_tip": "未标定（原始）模式下的剪切力 FX/FY 纵轴 ±上限。0 = 自动量程",
    "reset_defaults": "恢复默认",
    "plot_filters": "滤波（作用于采集，界面与记录同步）",
    "filter_preset": "预设",
    "filter_preset_tip": "选择一档现成的滤波组合；改下面任一数值会变成“自定义”",
    "filter_preset_custom": "自定义",
    "filter_flow_ema": "光流 EMA α",
    "filter_flow_ema_tip": "光流的时间平滑。1.00 = 关。它改变的是“测量本身”（接触统计与力值都会变），两个 α 不同的录制不可比 —— 只有确实需要压光流抖动时才调",
    "filter_median": "中值窗口",
    "filter_median_tip": "力读数的滑动中值窗口（采样数）。1 = 关。去掉单点尖峰，代价是约半个窗口的延迟",
    "filter_lowpass": "低通截止",
    "filter_lowpass_tip": "力读数低通截止频率（Hz）。0 = 关。必须在奈奎斯特频率（帧率的一半）以下，否则设备不会滤",
    "filter_order": "低通阶数",
    "filter_order_tip": "低通滤波器阶数（1–6）。越高越陡，相位失真也越大",
    "filter_rate": "采样率",
    "filter_rate_tip": "低通系数按哪个采样率设计（Hz）",
    "filter_rate_auto": "自动跟随帧率",
    "filter_rate_auto_tip": "按设备实测帧率设计低通系数；取消可固定一个数值",
    "filter_measurement_note": "光流 EMA 属于“测量”设置：改了它，本次录制与之前的不可比。",
    "filter_locked": "录制中不能更改滤波；下一次采集生效。",
    "filter_nyquist": "注意：低通 {cutoff} Hz 已达到或超过奈奎斯特频率 {nyquist} Hz（采样率 {rate} Hz）——设备不会滤。请调低截止频率或固定更高的采样率。",
    "filter_off": "当前不滤波（原始读数）",
    "ok": "确定",
    "cancel": "取消"
  },
  "toolbar": {
    "search_cameras": "搜索",
    "cam_id": "摄像机",
    "use_camera": "使用摄像机",
    "use_camera_tip": "回到摄像机采集（当前的数据源是视频文件）",
    "choose_video": "选择录制视频…",
    "choose_video_tip": "打开一段录制的视频：2D 面板放视频，曲线读同目录的 forces.csv（原始记录值）",
    "preview": "预览",
    "preview_stop": "停止预览",
    "run": "运行",
    "stop": "停止",
    "run_label": "▶  运行",
    "stop_label": "■  停止",
    "cancel_label": "■  取消连接",
    "cancel_tip": "中断连接（连接卡住时随时可用，快捷键 Esc）",
    "run_unavailable": "当前不可运行",
    "run_disabled_video": "请先选择一个视频文件",
    "run_disabled_sensor": "此传感器类型暂不支持运行",
    "playback": "▶  回放",
    "playback_pause": "⏸  暂停",
    "playback_tip": "按 1× 播放这段录制（空格键同效）；拖动游标即暂停",
    "playback_pause_tip": "暂停播放（拖动游标、框选或滚轮也会暂停）",
    "playback_disabled": "先打开一段录制视频（左上「选择录制视频…」）",
    "reset": "重置",
    "units": "单位",
    "units_newton": "牛顿",
    "units_raw": "原始",
    "settings": "设置",
    "settings_tip": "展开或收起单位、记录模式与预览"
  },
  "units": {
    "newton_short": "N",
    "raw_short": "raw"
  },
  "sensor": {
    "type": "传感器",
    "config": "传感器配置",
    "type_tip": "选择产品/传感器：box、mini、finger。它决定可用的配置文件与算法参数。",
    "config_tip": "该传感器使用的算法配置文件（config/*.json）。切换传感器会同时切换可选配置。",
    "summary": "{type} · {config}",
    "dialog_title": "传感器与标定",
    "dialog_tip": "选择传感器类型与配置文件，并查看当前生效的标定与最近导出的系数",
    "calib_section": "当前生效的标定",
    "calib_version": "设备确认的版本",
    "calib_axes": "已标定轴",
    "calib_config": "配置",
    "calib_none": "设备尚未确认加载标定",
    "export_section": "最近导出的系数",
    "export_none": "还没有导出过系数",
    "export_file": "文件 {name}（{size} KB，{time}）",
    "export_identity": "文件身份  类型 {sensor_type} · SN {sn} · 配置 {config}",
    "thumb_placeholder": "产品型号"
  },
  "panels": {
    "arrow": "2D 图像",
    "view_arrows_pure": "箭头",
    "view_arrows_stitched": "箭头/采集图像",
    "view_depth": "深度图",
    "view_recorded": "原始图像",
    "view_mode_tip": "运行时的图像显示模式",
    "replay_pipeline": "录制视频（原始相机图像）",
    "replay_pipeline_tip": "回放显示的是录制下来的原始相机图像，不含实时箭头叠加；要复核算法请用「视图 → 由视频重算力值」",
    "replay_empty": "尚未打开录制\n点击下方「打开录制…」",
    "arrow_empty": "尚未采集图像\n请选择视频或摄像机后点击「运行」",
    "arrow_empty_tip": "运行或预览后在此显示形变箭头图",
    "depth_unavailable": "本帧没有深度数据\n（不是深度为零，也未回退显示普通形变图）",
    "depth_scale": "深度色标 {low} – {high}",
    "arrow_scale": "箭头按位移放大 ×{factor}",
    "arrow_scale_tip": "相对位移的显示放大倍率：箭头由原始采集图像经算法输出，长度按测量位移放大后绘制，上限为网格间距的 0.8 倍；触顶的箭头不再呈现真实倍率。",
    "arrow_pipeline": "原始图像 → 算法输出",
    "arrow_pipeline_tip": "箭头画在算法输出上，不是相机原始帧：阈值以下的区域不画箭头",
    "arrow_area_masked": "有效区域",
    "arrow_area_full": "全画幅",
    "depth_scale_tip": "本会话固定色标：色标范围锁定在首个有效深度帧，便于跨帧比较；灰色区域表示无深度数据",
    "plots": "力曲线图",
    "cal": "标定",
    "mesh3d": "三维网格",
    "mesh3d_empty": "手指三维视图占位 —\nOpen3D 网格稍后加入",
    "mesh3d_empty_tip": "手指传感器的三维网格预览"
  },
  "chart": {
    "fn": "FN",
    "fx": "FX",
    "fy": "FY",
    "fn_name": "法向力",
    "fx_name": "切向力 X",
    "fy_name": "切向力 Y",
    "window_readout": "{start} – {end} s / 全程 {total} s",
    "window_tip": "拖动高亮区域即可移动视窗；这是整段会话的时间轴",
    "no_data": "—",
    "mode_follow": "跟随实时",
    "mode_follow_tip": "曲线跟随最新样本，窗口随采集滚动",
    "mode_browse": "浏览历史",
    "mode_browse_tip": "显示暂停，采集与记录继续；拖动或滚轮改变窗口，点「返回最新」回到实时",
    "mode_replay": "回放录制（浏览）",
    "mode_replay_tip": "曲线读的是打开的录制；回放期间采集与记录继续",
    "return_latest": "返回最新",
    "return_latest_tip": "退出历史浏览，恢复跟随最新数据",
    "overview": "全程总览",
    "overview_tip": "把整个会话缩放到一屏；拖动下方总览条可移动视窗",
    "box_zoom": "框选",
    "box_zoom_tip": "切换为框选放大（拖动图表框选区域）",
    "settings": "曲线图设置",
    "settings_tip": "时间窗口、纵轴量程，以及采集端滤波（界面与记录用同一份数据）",
    "selection": "选区 {duration}s / {samples} 点 — {detail}",
    "selection_summary": "选区 {duration}s / {samples} 点",
    "selection_detail": "均 {mean} · σ {std}",
    "selection_peak_tip": "上方大号数字是选区的峰值；均值为选区均值",
    "selection_empty": "选区无有效样本",
    "value_unavailable": "不可用",
    "value_unavailable_tip": "{channel} 轴未加载标定曲线，因此没有该单位的数值（不会用原始值冒充）",
    "unit_toggle": "切换单位",
    "unit_toggle_tip": "点击在「牛顿」与「原始单位」之间切换三轴曲线与读数",
    "browse_only_tip": "拖动或滚轮即可进入历史浏览"
  },
  "playback": {
    "title": "录制回放",
    "open": "打开录制视频…",
    "video_filter": "录制的视频 (*.mp4 *.avi *.mov *.mkv);;所有文件 (*)",
    "no_video": "这段录制没有可用的视频分段",
    "open_failed": "无法打开该录制: {error}",
    "none_found": "outputs/recordings 下没有找到录制",
    "frame_dropped": "该帧未被写入视频（记录队列曾溢出）",
    "frame_unreadable": "该帧无法从视频中解码",
    "warnings": "回放提示: {detail}",
    "decimated": "该录制较长，曲线为降采样视图（显示 {shown} / 共 {total} 行；区间数据按需从磁盘读取）",
    "warn_config_changed": "配置文件与录制时不一致：由视频重算的结果可能与当时不同",
    "warn_sdk_changed": "SDK 版本与录制时不一致：由视频重算的结果可能不同",
    "warn_config_missing": "找不到配置哈希，无法校验重算一致性",
    "warn_rows_skipped": "有无法解析的 CSV 行被跳过",
    "warn_frames_dropped": "有帧在队列溢出时丢失，仅保留索引记录（回放显示为“该帧未录制”）",
    "warn_out_of_order": "该录制由旧版本写入，行序不是时间序；回放已按时间重排，区间边界可能与当时不同"
  },
  "record": {
    "label": "记录",
    "mode_video_data": "视频 + 数据",
    "mode_data_only": "仅数据",
    "mode_tip": "视频记录的是处理前的相机输入图像（不含箭头与文字叠加）。MP4 是有损封装，不等于无损原始数据。",
    "start_label": "● 开始记录",
    "stop_label": "■ 停止记录",
    "start_tip": "开始记录本实验：视频、力数据与元数据写入同一目录",
    "stop_tip": "停止记录并写入 session.json（随时可用）",
    "requires_run": "请先点击「运行」开始采集，再开始记录",
    "started": "已开始记录（{mode}）",
    "start_failed": "无法开始记录: {error}",
    "finished": "记录完成 — {frames} 帧 / {segments} 段，已写入 {path}",
    "finished_with_problems": "记录完成，但存在问题: {detail}",
    "closing": "正在关闭记录文件…",
    "failed_state": "记录已失败（详见摘要与日志）",
    "alarm": "记录异常: {detail}",
    "state_idle": "尚未记录",
    "state_recording": "记录中 {duration}",
    "state_closing": "正在写入…",
    "state_error": "写入异常（{count}）",
    "state_done": "上次记录 {frames} 帧",
    "dropped": "丢帧 {count}",
    "strip_idle": "本次会话还没有开始记录",
    "strip_no_error": "无",
    "strip_no_path": "尚未创建",
    "strip_tip": "记录状态: {state}\n帧 {frames} / 分段 {segments} / 时长 {duration}\n丢帧 {dropped}（数据 {dropped_data}、视频 {dropped_video}、空洞 {dropped_gaps}）\n写入错误 {errors}\n最近错误: {detail}\n输出目录 {path}"
  },
  "cal": {
    "weight": "砝码重量 (N)",
    "duration": "采集时长",
    "record": "记录",
    "recording_stop": "停止",
    "record_disabled": "请先点击「运行」开始采集，再记录标定样本",
    "record_cancelled": "已取消本次采集",
    "empty_hint": "当前通道尚无样本：运行后选择通道并点击「记录」。",
    "delete_row": "删除行",
    "clear_channel": "清空通道",
    "clear_all": "全部清空",
    "export": "导出系数…",
    "export_tip": "只写出 SDK 标定系数文件，不改变运行中的设备",
    "apply": "应用到设备",
    "apply_tip": "把最近导出的系数下发到运行中的设备（需再次确认）",
    "apply_no_export": "还没有导出的系数文件，请先「导出系数」",
    "save_record": "保存标定记录…",
    "save_record_tip": "保存本次标定会话的全部点与三轴完整采样（审计数据），与系数文件相互独立",
    "save_record_empty": "还没有标定点，无法保存标定记录",
    "save_record_ok": "已保存标定记录 {path}\n{points} 个点，共 {samples} 条三轴采样",
    "save_record_failed": "保存标定记录失败: {error}",
    "open_record": "打开标定记录…",
    "open_record_tip": "重新打开已保存的标定会话，检查每个点的完整采样与诊断状态",
    "open_record_filter": "标定记录 (*.json)",
    "open_record_ok": "已载入 {path}（{points} 个点）",
    "open_record_device": "记录设备: {device}",
    "open_record_warnings": "注意: {detail}",
    "open_record_failed": "打开标定记录失败: {error}",
    "apply_mismatch_title": "标定与目标设备不匹配",
    "apply_mismatch": "该标定文件属于: {device}\n不匹配项: {detail}\n\n当前目标: {sensor_type} / {config}\n\n继续应用会把不适用于本设备的系数写入运行中的设备。",
    "apply_mismatch_skipped": "已取消应用（标定身份与目标设备不匹配）",
    "sn": "序列号",
    "sn_placeholder": "序列号（可选）",
    "live_raw_label": "实时原始值",
    "live_raw": "实时原始值  FN={fn}  FX={fx}  FY={fy}",
    "col_weight": "参考载荷",
    "col_fn": "FN 均值",
    "col_fx": "FX 均值",
    "col_fy": "FY 均值",
    "col_stability": "稳定性",
    "col_state": "状态",
    "col_raw": "原始均值",
    "col_n": "n",
    "col_std": "σ",
    "state_ok": "正常",
    "state_excluded": "已排除",
    "state_validation": "验证点",
    "state_exclude": "排除",
    "state_exclude_tip": "把选中点排除出拟合与导出（记录保留，可恢复）",
    "state_restore": "恢复",
    "mark_validation": "设为验证点",
    "mark_validation_tip": "把选中点留作独立验证点：不参与拟合，用于检验拟合",
    "excluded": "该点已排除出拟合",
    "restored": "该点已恢复",
    "marked_validation": "该点已标记为验证点",
    "unmarked_validation": "该点已取消验证点标记",
    "fit_insufficient": "拟合需要至少 2 个有效点（当前 {count} 个）",
    "fit_summary": "导出模型 {channel}: {method}（{count} 点 / {breakpoints} 个折点，最大残差 {residual} N）",
    "fit_validation": "独立验证 {count} 点，最大偏差 {error} N",
    "method_piecewise_linear": "分段线性",
    "method_linear": "线性",
    "point_title": "标定点 {channel} @ {load} N",
    "point_channel": "加载轴",
    "point_direction": "方向",
    "point_round": "轮次",
    "point_duration": "实际采样时长",
    "point_duration_value": "{actual} s（请求 {requested} s）",
    "point_samples": "样本数",
    "point_samples_value": "有效 {valid} / 共 {total}",
    "point_axes": "三轴均值 ± 标准差",
    "point_residual": "拟合残差",
    "col_actions": "",
    "recording": "正在采集标定样本…",
    "recording_stop_tip": "点击可取消本次标定采集（随时可用）",
    "record_ok": "已记录 weight={weight} raw={raw}",
    "record_failed_few": "采集失败 — 样本过少",
    "export_ok": "已导出 {path}",
    "export_local": "同时写入 {path}",
    "export_warnings": "跳过: {detail}",
    "export_failed": "导出失败: {error}",
    "export_no_model": "没有可导出的模型: {detail}",
    "apply_title": "应用标定",
    "apply_confirm": "将刚导出的标定应用到当前设备？\n\n设备类型: {sensor_type}\n配置: {config}\n\n选择「否」只保留导出文件，不改动运行中的设备。",
    "apply_skipped": "已导出，未应用到设备",
    "apply_pending": "已请求把标定应用到 {sensor_type}，等待设备确认…",
    "applied": "设备已确认标定生效（版本 {version}）",
    "applied_none": "设备已确认：当前没有加载标定（该项留空）",
    "export_only": "已导出系数 {path}（未应用到设备）",
    "apply_no_target": "没有可应用的设备（请先运行一次采集）"
  },
  "status": {
    "phase_idle": "空闲",
    "phase_connecting": "连接中",
    "phase_running": "采集中",
    "phase_error": "出错",
    "rail_video_name": "视频文件: {name}",
    "data_valid": "数据有效",
    "data_invalid": "无效样本 {count}",
    "calibrated": "已标定",
    "calibrated_all": "已标定 · 三轴",
    "calibrated_axes": "已标定 · {axes}",
    "uncalibrated": "未标定",
    "config_none": "未选配置",
    "camera_none": "未发现摄像机",
    "camera_found": "发现 {count} 个摄像机: {names}",
    "preview_started": "预览已启动（摄像机 {camera_id}）",
    "preview_stopped": "预览已停止",
    "preview_failed": "预览失败: {error}",
    "connect_slow": "连接耗时较长，可点击「取消连接」或按 Esc 中断",
    "run_stopped": "已停止",
    "run_stopping": "正在停止…（正在释放设备）",
    "run_stopping_cancelled": "已取消连接（正在释放设备）",
    "sample_invalid": "采样无效（第 {count} 次）：{reason} — 该样本已标记无效，未计入曲线与标定",
    "samples_dropped": "记录缓冲已达上限，最早的 {count} 个样本已被释放（全程记录不再完整）",
    "run_failed": "启动失败: {error}",
    "filters_saved": "滤波设置已保存：{describe}（下次采集生效）",
    "rail_camera_fps": "摄像头 {fps}",
    "video_ended": "视频已结束",
    "camera_disconnected": "摄像机已断开",
    "reset_ok": "追踪器已重置",
    "reset_pending": "已请求归零，等待采集线程确认…",
    "finger_run_unavailable": "此传感器类型暂不支持运行",
    "video_required": "请先选择视频文件",
    "config_missing": "未找到传感器配置: {type}",
    "units_raw_fallback": "无标定数据 — 显示原始单位",
    "reveal_failed": "无法打开配置位置: {error}"
  }
}