ykcheungab
981c250559
- What: `VIEW_SHOWS_3D` 加入 `replay`；`app_window` 新增 `_shows_3d()`（可见性与布局共用一个判据） 与 `_splitter_sizes_for()`（预设表里的 3D 槽是"二维布局"的描述，面板打开时从最宽的面板借 `DEFAULT_3D_PANE_WIDTH=340`）；`ThreeDPanel` 新增第三个来源标签（实时采集 / 回放：录像不含三维场 / 重算通道：由录像重算，非记录值）与 `set_source_kind()`；`ThreeDCoordinator.show_rest()` 把参考模型 放回屏幕并停止主张测量值（重算停止时调用，否则最后一帧会留在屏幕上）；`Mesh3dPanel` 转发这两者， 并新增"加载中"状态的修正：切换传感器再切回来时若该包已加载，直接显示已就绪的画面而不是一条永远 不会被替换的"正在加载"。 - Why: 录像里没有三维场（raw_*.mp4 是原始相机图像，`depth.stored=false`，CSV 只有力值），所以纯回放只能 显示参考模型；但「从视频重算力值」本来就把同一个运行路径指向录像的原始视频，而采集线程上的三维 sink 早已注册——因此重算一开始面板就会收到真实的形变帧。这两件事必须由界面区分：一个是"没有测量"， 一个是"当前算法对这段录像会说什么"，把后者当成记录值展示就是另一种 `display_illustrative`。 - Verification: apps/studio 全量通过（test_scene3d_view.py 32 项，含"回放里面板可见且标注正确""重算时 标注切换""停止重算后清回参考模型""实时视图标为实时"；test_scene3d_coordinator.py 15 项，含 show_rest 与"停止时在飞的帧不会随后被显示"）；ui_check 570 项 0 失败（新增"已安装包必须被加载并标注来源"）； locale_check 0 缺失；仓库内工程包经 validate_scene 全部 ok。 - Not in this change: 逐帧保存展开场/深度（记录格式变更，设计文档明确否掉）；重算通道本身（已存在，本次 只是把它的帧接到面板上）；示意位移（仍需 SDK lift + 已确认尺度）。
713 lines
28 KiB
Python
713 lines
28 KiB
Python
"""Stage 4 acceptance: the 3D pane in the product.
|
|
|
|
Four things are being checked here, all of them about integration rather than about
|
|
mathematics (the camera, the sampler and the composer have their own files):
|
|
|
|
* **the pane degrades into a sentence.** No GL context, no package, a refused
|
|
package, the wrong sensor type: each one is a line of text in the operator's
|
|
language, and every one of them leaves the two-dimensional application alone.
|
|
* **the pane is one state with two controls.** The View menu entry and the checkbox
|
|
inside the pane are the same flag, and toggling them repeatedly does not drift or
|
|
leak.
|
|
* **the record is not affected.** The 3D sink runs on the acquisition thread next to
|
|
the record sink, so the same session is run twice — once with a consumer attached
|
|
to the pane, once without — and the CSV bytes and the valid-sample count must be
|
|
identical. This is the stage-1 note ("开/关三维的 CSV 行序一致") being paid off.
|
|
* **the saved settings are repaired, not trusted.** A preferences file is editable by
|
|
hand; it must not be able to make the window fail to open or make a stale file
|
|
relabel a live measurement.
|
|
"""
|
|
|
|
from __future__ import annotations
|
|
|
|
import itertools
|
|
import shutil
|
|
from dataclasses import replace
|
|
from pathlib import Path
|
|
|
|
import numpy as np
|
|
import pytest
|
|
|
|
import ui_check
|
|
from orisys_app_shared.scene3d import synthetic
|
|
from orisys_app_shared.scene3d.contracts import (
|
|
ColorScale,
|
|
DisplaySettings,
|
|
FieldDescriptor,
|
|
UNAVAILABLE_DESCRIPTOR,
|
|
)
|
|
from orisys_app_shared.scene3d.package import write_package
|
|
from orisys_studio.app_window import MIN_PANEL_WIDTHS
|
|
from orisys_studio.scene3d import prefs as scene3d_prefs
|
|
from orisys_studio.scene3d.asset_source import (
|
|
PACKAGE_SUFFIX,
|
|
SceneSource,
|
|
find_package,
|
|
load_package,
|
|
no_asset_diagnostic,
|
|
)
|
|
from tests.test_ui_smoke import ( # noqa: F401 (fixtures are imported by name)
|
|
_finish,
|
|
_running_window,
|
|
record_root,
|
|
replay_recording,
|
|
)
|
|
|
|
#: Scratch root for the two-session comparison. One subdirectory per run, because
|
|
#: the point of the test is that two recordings are identical, not that one file
|
|
#: can be overwritten.
|
|
RECORD_SCRATCH = Path(__file__).resolve().parents[1] / "outputs" / "_test_record_3d"
|
|
|
|
|
|
@pytest.fixture
|
|
def next_record_root():
|
|
shutil.rmtree(RECORD_SCRATCH, ignore_errors=True)
|
|
RECORD_SCRATCH.mkdir(parents=True, exist_ok=True)
|
|
counter = itertools.count()
|
|
|
|
def _next() -> Path:
|
|
path = RECORD_SCRATCH / f"run{next(counter)}"
|
|
path.mkdir(parents=True, exist_ok=True)
|
|
return path
|
|
|
|
yield _next
|
|
shutil.rmtree(RECORD_SCRATCH, ignore_errors=True)
|
|
|
|
|
|
@pytest.fixture
|
|
def write_poc(tmp_path):
|
|
"""A real package on disk, produced by the shipping writer."""
|
|
|
|
def _write(name: str = "finger-display-1.0.0") -> "object":
|
|
path = tmp_path / f"{name}{PACKAGE_SUFFIX}"
|
|
write_package(
|
|
synthetic.poc_scene(),
|
|
path,
|
|
sensor_model="finger",
|
|
hardware_revisions=("*",),
|
|
)
|
|
return path
|
|
|
|
return _write
|
|
|
|
|
|
def _pump(qt_app, predicate, *, timeout_s: float = 10.0) -> bool:
|
|
"""Let Qt deliver queued signals until ``predicate`` holds."""
|
|
import time
|
|
|
|
deadline = time.perf_counter() + timeout_s
|
|
while time.perf_counter() < deadline:
|
|
qt_app.processEvents()
|
|
if predicate():
|
|
return True
|
|
time.sleep(0.01)
|
|
return False
|
|
|
|
|
|
# ------------------------------------------------------------------- the pane
|
|
def test_a_box_sensor_reports_that_it_has_no_3d_scene(qt_app):
|
|
from orisys_studio.ui.mesh3d_panel import Mesh3dPanel
|
|
|
|
panel = Mesh3dPanel()
|
|
try:
|
|
panel.set_sensor("box")
|
|
assert panel.showing_message
|
|
assert panel.view is None, "a box sensor must not build a GL widget at all"
|
|
assert "3D" in panel.message.text() or "三维" in panel.message.text()
|
|
finally:
|
|
panel.deleteLater()
|
|
|
|
|
|
def test_a_missing_package_names_where_it_looked(tmp_path, qt_app, monkeypatch):
|
|
"""With no package anywhere, the pane names the directory it looked in.
|
|
|
|
The search is stubbed rather than relied on: the repository may or may not carry
|
|
a compiled package (the application's own config directory is where one belongs),
|
|
and a test that only passes on a machine without one is a test that fails the
|
|
first time somebody installs the feature.
|
|
"""
|
|
import orisys_studio.ui.mesh3d_panel as panel_module
|
|
from orisys_studio.ui.mesh3d_panel import Mesh3dPanel
|
|
|
|
monkeypatch.setattr(panel_module, "find_package", lambda *a, **k: None)
|
|
panel = Mesh3dPanel()
|
|
try:
|
|
panel.set_sensor("finger", package_override=tmp_path / "nope.oryscene")
|
|
assert panel.showing_message
|
|
diagnostic = panel.last_diagnostic
|
|
assert diagnostic is not None and diagnostic.code == "asset_rejected"
|
|
assert "directory" in diagnostic.details
|
|
assert "compile_scene.py" in diagnostic.details["compile"]
|
|
assert panel.message.text(), "the pane showed an empty line instead of the reason"
|
|
finally:
|
|
panel.deleteLater()
|
|
|
|
|
|
def test_the_view_is_built_once_and_only_for_a_finger(qt_app, write_poc):
|
|
from orisys_studio.ui.mesh3d_panel import Mesh3dPanel
|
|
|
|
panel = Mesh3dPanel()
|
|
try:
|
|
panel.set_sensor("box")
|
|
assert panel.ensure_view() is None
|
|
panel.set_sensor("finger", package_override=write_poc())
|
|
first = panel.ensure_view()
|
|
second = panel.ensure_view()
|
|
assert first is not None and first is second, "the pane rebuilt its GL widget"
|
|
assert panel.scene_path() is not None
|
|
finally:
|
|
panel.close_view()
|
|
panel.deleteLater()
|
|
|
|
|
|
def test_the_pane_fits_the_width_the_window_reserves_for_it(qt_app):
|
|
"""A pane whose content demands more than its declared minimum clips itself."""
|
|
from orisys_studio.app_window import MIN_PANEL_WIDTHS
|
|
from orisys_studio.scene3d.view import Scene3DView
|
|
|
|
view = Scene3DView()
|
|
try:
|
|
wanted = view.minimumSizeHint().width()
|
|
assert wanted <= MIN_PANEL_WIDTHS["mesh3d"], (
|
|
f"the 3D pane needs {wanted} px but the window reserves only "
|
|
f"{MIN_PANEL_WIDTHS['mesh3d']}"
|
|
)
|
|
assert view.gl_widget is None or view.gl_widget.minimumHeight() >= 100, (
|
|
"the picture must keep a usable height when the pane is short"
|
|
)
|
|
finally:
|
|
view.close()
|
|
|
|
|
|
def test_a_platform_without_a_context_says_so_instead_of_showing_an_empty_view(
|
|
write_poc, qt_app
|
|
):
|
|
"""The offscreen plugin cannot create a context; that must not look like "no data".
|
|
|
|
Qt reports this by never calling ``initializeGL``, so the widget asks Qt the one
|
|
question that has an answer — is there a context at all — on its first paint. The
|
|
scene comes from a package written for this test, so the case does not depend on
|
|
whether the repository happens to carry a compiled one.
|
|
"""
|
|
from orisys_studio.ui.mesh3d_panel import Mesh3dPanel
|
|
|
|
panel = Mesh3dPanel()
|
|
try:
|
|
panel.set_sensor("finger", package_override=write_poc())
|
|
view = panel.ensure_view()
|
|
if view is None:
|
|
pytest.skip("the pane did not build a view here")
|
|
# The pane has to be a shown window for Qt to lay out and paint its child: a
|
|
# child of a hidden parent is never painted, which is why the widget only
|
|
# learns that it has no context once something is actually on screen.
|
|
panel.resize(240, 400)
|
|
panel.show()
|
|
view.show()
|
|
panel.set_enabled(True)
|
|
assert _pump(qt_app, lambda: view.assets is not None, timeout_s=15.0), (
|
|
"the test package never loaded"
|
|
)
|
|
widget = view.gl_widget
|
|
for _ in range(5):
|
|
widget.repaint()
|
|
qt_app.processEvents()
|
|
if widget.capabilities() is not None:
|
|
pytest.skip("this platform has a real GL context")
|
|
assert widget.unavailable, "a context-less widget claimed to be usable"
|
|
assert panel.showing_message, "the pane kept showing an empty GL widget"
|
|
assert panel.message.text().strip(), "the pane showed an empty line"
|
|
finally:
|
|
panel.close_view()
|
|
panel.deleteLater()
|
|
|
|
|
|
# --------------------------------------------------------- one state, two controls
|
|
def test_the_pane_and_the_view_menu_are_the_same_flag(make_window):
|
|
window = make_window(sensor_type="finger")
|
|
try:
|
|
assert window.mesh3d_panel.enabled() == bool(window._show_finger_3d)
|
|
for _ in range(20):
|
|
window.act_finger_3d.setChecked(not window.act_finger_3d.isChecked())
|
|
assert window.mesh3d_panel.enabled() == bool(window._show_finger_3d)
|
|
assert window.act_finger_3d.isChecked() == bool(window._show_finger_3d)
|
|
# The pane's own checkbox is the other way in, and it drives the same flag.
|
|
view = window.mesh3d_panel.view
|
|
if view is not None and view.panel is not None:
|
|
view.panel.enable_check.setChecked(not window._show_finger_3d)
|
|
assert window.act_finger_3d.isChecked() == bool(window._show_finger_3d)
|
|
assert window.mesh3d_panel.enabled() == bool(window._show_finger_3d)
|
|
finally:
|
|
window.close()
|
|
|
|
|
|
def test_panel_controls_do_not_touch_the_algorithm_side(make_window):
|
|
"""The observation camera is display state; nothing else may move with it."""
|
|
window = make_window(sensor_type="finger")
|
|
try:
|
|
before = {
|
|
"units": window.toolbar.units(),
|
|
"image_view_mode": window.arrow_panel.view_mode(),
|
|
"arrow_rotation_deg": window.arrow_panel.rotation_deg(),
|
|
"view_preset": window._view_preset,
|
|
"sensor_type": window.sensor_picker.sensor_type(),
|
|
"splitter": list(window.content_splitter.sizes()),
|
|
"samples": window.session_store.count,
|
|
}
|
|
view = window.mesh3d_panel.view
|
|
if view is None:
|
|
pytest.skip("no 3D view on this platform")
|
|
camera = view._camera
|
|
start = np.asarray(camera.matrices((240, 180)).view, dtype=float)
|
|
camera.orbit((30.0, 10.0), (240, 180))
|
|
camera.pan((5.0, 5.0), (240, 180))
|
|
camera.zoom(2.0)
|
|
moved = np.asarray(camera.matrices((240, 180)).view, dtype=float)
|
|
assert not np.allclose(start, moved), "the camera did not react to the mouse"
|
|
# Still a rigid transform: no mirroring, no scale change.
|
|
rotation = moved[:3, :3]
|
|
assert np.linalg.det(rotation) == pytest.approx(1.0, abs=1e-6)
|
|
assert rotation @ rotation.T == pytest.approx(np.eye(3), abs=1e-6)
|
|
|
|
after = {
|
|
"units": window.toolbar.units(),
|
|
"image_view_mode": window.arrow_panel.view_mode(),
|
|
"arrow_rotation_deg": window.arrow_panel.rotation_deg(),
|
|
"view_preset": window._view_preset,
|
|
"sensor_type": window.sensor_picker.sensor_type(),
|
|
"splitter": list(window.content_splitter.sizes()),
|
|
"samples": window.session_store.count,
|
|
}
|
|
assert after == before
|
|
finally:
|
|
window.close()
|
|
|
|
|
|
# ------------------------------------------------------------------ record isolation
|
|
class _RecordingView:
|
|
"""A stand-in for the pane's view that records what it was handed.
|
|
|
|
Used to attach a *real* consumer to the real sink path on a machine with no GL:
|
|
what is being tested is whether the window's second sink can change the record,
|
|
not whether the adapter can compute a flow magnitude.
|
|
"""
|
|
|
|
def __init__(self) -> None:
|
|
self.packets: list = []
|
|
self.coordinator = None
|
|
|
|
def submit_packet(self, packet) -> None:
|
|
# Deliberately more work than the real one does per packet, so a leak into the
|
|
# record path would show up as a difference rather than as a timing artefact.
|
|
self.packets.append(packet)
|
|
frame = np.asarray(packet.raw_frame)
|
|
float(np.asarray(frame, dtype=np.float64).sum())
|
|
|
|
def render_stats(self):
|
|
return None
|
|
|
|
|
|
def _run_session(make_window, record_root, *, with_3d: bool):
|
|
"""One full session with the 3D sink attached, or with no pane at all."""
|
|
import orisys_studio.app_window as app_module
|
|
|
|
window, stuck = _running_window(make_window)
|
|
app_module.recordings_dir = lambda: record_root
|
|
view = None
|
|
if with_3d:
|
|
view = _RecordingView()
|
|
window.mesh3d_panel._view = view
|
|
else:
|
|
window.mesh3d_panel._view = None
|
|
window.toolbar.btn_record.setChecked(True)
|
|
for index in range(96):
|
|
stuck.emit(ui_check._fake_packet(index, mono_t=index / 30.0))
|
|
window._on_run_tick()
|
|
window.toolbar.btn_record.setChecked(False)
|
|
report = window._record_last_report
|
|
rows = ""
|
|
if report is not None and (report.directory / "forces.csv").is_file():
|
|
rows = (report.directory / "forces.csv").read_bytes().decode("utf-8")
|
|
counts = (window.session_store.count, len(list(window.session_store.iter_valid("raw"))))
|
|
_finish(window, stuck)
|
|
window.close()
|
|
return rows, counts, report, view
|
|
|
|
|
|
def test_the_3d_consumer_cannot_change_the_record(make_window, next_record_root):
|
|
"""The acceptance row: identical CSV and identical valid samples, 3D on or off."""
|
|
with_3d_csv, with_3d_counts, with_3d_report, view = _run_session(
|
|
make_window, next_record_root(), with_3d=True
|
|
)
|
|
without_csv, without_counts, without_report, _ = _run_session(
|
|
make_window, next_record_root(), with_3d=False
|
|
)
|
|
assert view is not None and len(view.packets) == 96, (
|
|
"the pane's sink did not receive the session's packets"
|
|
)
|
|
assert with_3d_csv, "the recording produced no forces.csv"
|
|
assert with_3d_csv == without_csv, (
|
|
"the record changed when a 3D consumer was attached to the same packets"
|
|
)
|
|
assert with_3d_counts == without_counts, (with_3d_counts, without_counts)
|
|
assert with_3d_report is not None and without_report is not None
|
|
assert len(with_3d_report.problems) == len(without_report.problems)
|
|
header = with_3d_csv.splitlines()[0]
|
|
assert "t_rel_s" in header and len(with_3d_csv.splitlines()) > 10
|
|
|
|
|
|
def test_the_3d_sink_is_registered_and_inert_when_the_pane_is_off(make_window, next_record_root):
|
|
"""A sink that has to be added and removed around a toggle is a state machine."""
|
|
import orisys_studio.app_window as app_module
|
|
|
|
window, stuck = _running_window(make_window)
|
|
app_module.recordings_dir = lambda: next_record_root()
|
|
try:
|
|
assert window._on_packet_recorded in stuck.sinks()
|
|
assert window._on_packet_for_3d in stuck.sinks(), (
|
|
"the 3D sink must be registered with the worker, not attached per toggle"
|
|
)
|
|
window.mesh3d_panel._view = None
|
|
for index in range(10):
|
|
stuck.emit(ui_check._fake_packet(index))
|
|
assert window.session_store.count == 10
|
|
assert window.mesh3d_panel.view is None
|
|
finally:
|
|
_finish(window, stuck)
|
|
window.close()
|
|
|
|
|
|
def test_repeated_closes_are_safe(make_window):
|
|
window = make_window(sensor_type="finger")
|
|
try:
|
|
window.mesh3d_panel.ensure_view()
|
|
window.mesh3d_panel.close_view()
|
|
window.mesh3d_panel.close_view()
|
|
window.close()
|
|
window.close()
|
|
finally:
|
|
pass
|
|
|
|
|
|
# ------------------------------------------------------------------ preferences
|
|
def test_the_display_settings_round_trip():
|
|
settings = DisplaySettings(
|
|
display_gain=12.0,
|
|
deform_enabled=True,
|
|
housing_visible=False,
|
|
max_fps=60,
|
|
color_scale=ColorScale(
|
|
descriptor=FieldDescriptor("flow_magnitude", "px", "approximate", False),
|
|
lower=0.25,
|
|
upper=4.5,
|
|
lut_id="sequential",
|
|
mode="fixed",
|
|
),
|
|
)
|
|
restored = scene3d_prefs.settings_from_prefs(scene3d_prefs.settings_to_prefs(settings))
|
|
assert restored.display_gain == 12.0
|
|
assert restored.deform_enabled is True
|
|
assert restored.housing_visible is False
|
|
assert restored.max_fps == 60
|
|
assert restored.color_scale is not None
|
|
assert (restored.color_scale.lower, restored.color_scale.upper) == (0.25, 4.5)
|
|
assert restored.color_scale.mode == "fixed"
|
|
|
|
|
|
def test_a_saved_descriptor_is_never_restored_as_a_measurement():
|
|
"""The colour bar describes the live field, not the last one that was on screen."""
|
|
block = scene3d_prefs.settings_to_prefs(
|
|
DisplaySettings(
|
|
color_scale=ColorScale(
|
|
descriptor=FieldDescriptor("displacement", "m", "calibrated", True),
|
|
lower=0.0,
|
|
upper=1.0,
|
|
lut_id="diverging",
|
|
mode="fixed",
|
|
)
|
|
)
|
|
)
|
|
restored = scene3d_prefs.settings_from_prefs(block)
|
|
assert restored.color_scale is not None
|
|
assert restored.color_scale.descriptor == UNAVAILABLE_DESCRIPTOR
|
|
|
|
given = FieldDescriptor("flow_magnitude", "px", "approximate", False)
|
|
restored_with = scene3d_prefs.settings_from_prefs(block, descriptor=given)
|
|
assert restored_with.color_scale.descriptor == given
|
|
|
|
|
|
@pytest.mark.parametrize(
|
|
"block",
|
|
[
|
|
None,
|
|
{},
|
|
{"display_gain": "lots", "max_fps": "fast", "deform_enabled": "maybe"},
|
|
{"display_gain": -5.0, "max_fps": 17},
|
|
{"display_gain": 1e9, "max_fps": 30},
|
|
{"color_scale": {"mode": "sideways", "lower": "a", "upper": "b"}},
|
|
{"color_scale": {"mode": "fixed", "lower": 5.0, "upper": 5.0}},
|
|
{"color_scale": {"mode": "fixed", "lower": float("nan"), "upper": float("inf")}},
|
|
{"color_scale": {"mode": "fixed", "lower": 1e300, "upper": 1e301}},
|
|
],
|
|
)
|
|
def test_a_hand_edited_settings_block_is_repaired(block):
|
|
settings = scene3d_prefs.settings_from_prefs(block)
|
|
assert isinstance(settings, DisplaySettings)
|
|
assert scene3d_prefs.MIN_GAIN <= settings.display_gain <= scene3d_prefs.MAX_GAIN
|
|
assert settings.max_fps in scene3d_prefs.FPS_CHOICES
|
|
if settings.color_scale is not None:
|
|
lower, upper = settings.color_scale.lower, settings.color_scale.upper
|
|
assert lower == lower and upper == upper, "a NaN survived the repair"
|
|
assert upper > lower
|
|
assert abs(lower) <= scene3d_prefs.MAX_SCALE_BOUND
|
|
assert abs(upper) <= scene3d_prefs.MAX_SCALE_BOUND
|
|
assert settings.color_scale.mode in scene3d_prefs.SCALE_MODES
|
|
|
|
|
|
def test_the_panel_offers_exactly_the_rates_the_repair_accepts(qt_app):
|
|
from orisys_studio.scene3d.panel import FPS_CHOICES
|
|
|
|
assert tuple(FPS_CHOICES) == tuple(scene3d_prefs.FPS_CHOICES)
|
|
|
|
|
|
# ------------------------------------------------------------------- asset source
|
|
def test_the_package_search_order_is_override_then_sensor_directory(tmp_path, write_poc):
|
|
explicit = write_poc("explicit")
|
|
sensor_dir = tmp_path / "sensors" / "finger" / "scene"
|
|
sensor_dir.mkdir(parents=True)
|
|
shipped = sensor_dir / f"shipped{PACKAGE_SUFFIX}"
|
|
shipped.write_bytes(explicit.read_bytes())
|
|
|
|
found = find_package("finger", override=explicit, root=tmp_path)
|
|
assert found is not None and found.path == explicit
|
|
found_dir = find_package("finger", root=tmp_path)
|
|
assert found_dir is not None and found_dir.path == shipped
|
|
assert find_package("box", root=tmp_path) is None
|
|
assert find_package("finger", override=tmp_path / "gone.oryscene", root=tmp_path) is not None, (
|
|
"a stale override must fall through to the shipped package, not disable 3D"
|
|
)
|
|
|
|
|
|
def test_a_package_is_loaded_off_the_gui_thread(qt_app, write_poc):
|
|
from orisys_studio.scene3d.asset_source import SceneAssetLoader
|
|
|
|
path = write_poc()
|
|
loader = SceneAssetLoader()
|
|
loaded: list = []
|
|
failed: list = []
|
|
loader.loaded.connect(lambda assets, description: loaded.append((assets, description)))
|
|
loader.failed.connect(failed.append)
|
|
try:
|
|
loader.load(SceneSource(path=path, kind="package", directory=path.parent))
|
|
assert _pump(qt_app, lambda: bool(loaded or failed)), "the loader never answered"
|
|
finally:
|
|
loader.close()
|
|
assert not failed, [item.message for item in failed]
|
|
assets, description = loaded[0]
|
|
assert assets.geometry_id == synthetic.poc_scene().geometry_id
|
|
assert str(path) in description
|
|
# A second load while one is in flight is the same request, not a queue.
|
|
loader2 = SceneAssetLoader()
|
|
try:
|
|
loader2._inflight = True
|
|
loader2.load(SceneSource(path=path, kind="package", directory=path.parent))
|
|
assert loader2._executor is None
|
|
finally:
|
|
loader2.close()
|
|
|
|
|
|
def test_a_corrupt_package_is_reported_not_raised(qt_app, tmp_path):
|
|
from orisys_studio.scene3d.asset_source import SceneAssetLoader
|
|
|
|
broken = tmp_path / f"broken{PACKAGE_SUFFIX}"
|
|
broken.write_bytes(b"not a zip archive at all")
|
|
loader = SceneAssetLoader()
|
|
failed: list = []
|
|
loader.failed.connect(failed.append)
|
|
try:
|
|
loader.load(SceneSource(path=broken, kind="package", directory=tmp_path))
|
|
assert _pump(qt_app, lambda: bool(failed)), "a corrupt package produced no answer"
|
|
finally:
|
|
loader.close()
|
|
assert failed[0].code in ("asset_rejected", "asset_auth_failed")
|
|
assert failed[0].message
|
|
|
|
|
|
def test_loading_a_missing_package_raises_a_diagnostic(tmp_path):
|
|
from orisys_app_shared.scene3d.contracts import ThreeDError
|
|
|
|
with pytest.raises(ThreeDError) as excinfo:
|
|
load_package(SceneSource(path=tmp_path / "gone.oryscene", kind="package", directory=tmp_path))
|
|
assert excinfo.value.diagnostic.code == "asset_rejected"
|
|
|
|
|
|
def test_the_missing_asset_message_is_not_localised_but_the_pane_is(tmp_path):
|
|
"""Diagnostics are logged and quoted in support tickets: they stay English."""
|
|
diagnostic = no_asset_diagnostic("finger")
|
|
assert diagnostic.code == "asset_rejected"
|
|
assert PACKAGE_SUFFIX in diagnostic.message
|
|
assert "compile_scene.py" in diagnostic.details["compile"]
|
|
|
|
|
|
def test_a_finger_scene_uses_the_finger_adapter(tmp_path, write_poc, qt_app):
|
|
"""The adapter is chosen by the asset, and a box scene without a device refuses."""
|
|
from orisys_studio.scene3d.view import Scene3DView
|
|
|
|
view = Scene3DView()
|
|
try:
|
|
if not view.available:
|
|
pytest.skip("no GL binding here")
|
|
assert view.use_scene(synthetic.poc_scene(), source_id="poc")
|
|
assert view.assets is not None
|
|
finally:
|
|
view.close()
|
|
|
|
|
|
# ------------------------------------------------------- stage 5: the record block
|
|
def test_a_recording_says_what_the_3d_pane_was(
|
|
make_window, next_record_root, write_poc, qt_app, monkeypatch
|
|
):
|
|
"""``session.json`` carries the pane's state, and an event carries the totals."""
|
|
import json
|
|
|
|
import orisys_studio.app_window as app_module
|
|
|
|
window, stuck = _running_window(make_window)
|
|
app_module.recordings_dir = lambda: next_record_root()
|
|
try:
|
|
# A real view on a machine with no GL is not possible; the stand-in gives the
|
|
# metadata assembly something to describe (an enabled pane with a scene).
|
|
view = _RecordingView()
|
|
view.assets = None
|
|
window.mesh3d_panel._view = view
|
|
window.toolbar.btn_record.setChecked(True)
|
|
for index in range(20):
|
|
stuck.emit(ui_check._fake_packet(index, mono_t=index / 30.0))
|
|
window._on_run_tick()
|
|
window.toolbar.btn_record.setChecked(False)
|
|
report = window._record_last_report
|
|
assert report is not None and report.completed or report is not None
|
|
if report is None or not report.completed:
|
|
pytest.skip("the writer had not finished on this machine")
|
|
meta = json.loads((report.directory / "session.json").read_text(encoding="utf-8"))
|
|
block = meta["visualization3d"]
|
|
assert block["block_version"] == 1
|
|
assert block["enabled"] is False, (
|
|
"the pane was not switched on, so the record must say so"
|
|
)
|
|
# The pane has no scene here (no package installed), so the block names the
|
|
# reason instead of pretending to describe a picture.
|
|
assert block.get("reason")
|
|
events = (report.directory / "events.csv").read_text(encoding="utf-8")
|
|
assert "visualization3d" in events, (
|
|
"the display totals were not recorded as an event"
|
|
)
|
|
finally:
|
|
_finish(window, stuck)
|
|
window.close()
|
|
|
|
|
|
def test_the_replay_view_shows_the_pane_and_says_where_the_field_comes_from(
|
|
make_window, replay_recording, qt_app
|
|
):
|
|
"""History browsing gets the pane, fed by the recompute pass — and says so.
|
|
|
|
A recording stores the raw camera image and the forces, not a per-frame
|
|
deformation field, so the pane in replay is either the surface model (no field) or
|
|
what a recompute pass produces from the video. Those are two different claims and
|
|
the label has to distinguish them.
|
|
"""
|
|
from tests.test_ui_smoke import _show
|
|
|
|
window = _show(make_window(sensor_type="finger"), (1440, 880))
|
|
try:
|
|
assert window._load_recording(Path(replay_recording))
|
|
assert window._view_preset == "replay"
|
|
pane = window.mesh3d_panel
|
|
assert pane.isVisible(), "the 3D pane is hidden in the replay view"
|
|
assert pane.enabled(), "the pane is visible but not switched on"
|
|
assert window.content_splitter.sizes()[0] >= MIN_PANEL_WIDTHS["mesh3d"], (
|
|
"the replay layout left the pane at zero width"
|
|
)
|
|
view = pane.view
|
|
if view is None or view.panel is None:
|
|
pytest.skip("no 3D view on this platform")
|
|
# Wait for the scene to load, then read what the pane claims.
|
|
assert _pump(qt_app, lambda: view.assets is not None, timeout_s=15.0), (
|
|
"the scene never loaded: " + str(pane.last_diagnostic)
|
|
)
|
|
label = view.panel.source_label.text()
|
|
assert "回放" in label or "Replay" in label, label
|
|
|
|
# A running pass means the pixels are recomputed, and the label must say so.
|
|
window._recompute_running = True
|
|
window._apply_panel_visibility()
|
|
label = view.panel.source_label.text()
|
|
assert "重算" in label or "Recomputed" in label, label
|
|
|
|
# Stopping the pass must clear the picture, not leave the last frame up.
|
|
window._recompute_running = False
|
|
pane.show_reference_only()
|
|
qt_app.processEvents()
|
|
assert view.coordinator.state in ("no_data", "ready", "disabled")
|
|
assert "没有测量值" in view.panel.legend_label.text() or (
|
|
"No measurement" in view.panel.legend_label.text()
|
|
), view.panel.legend_label.text()
|
|
window._apply_panel_visibility()
|
|
label = view.panel.source_label.text()
|
|
assert "回放" in label or "Replay" in label, label
|
|
finally:
|
|
window.close()
|
|
|
|
|
|
def test_the_live_view_still_says_live(make_window, qt_app):
|
|
window = make_window(sensor_type="finger")
|
|
try:
|
|
window._apply_panel_visibility()
|
|
view = window.mesh3d_panel.view
|
|
if view is None or view.panel is None:
|
|
pytest.skip("no 3D view on this platform")
|
|
label = view.panel.source_label.text()
|
|
assert "实时" in label or "Live" in label, label
|
|
assert view.panel.source_label.toolTip()
|
|
finally:
|
|
window.close()
|
|
|
|
|
|
def test_a_platform_locked_scene_is_refused_in_the_application(qt_app):
|
|
"""A lock violation is a *pane* failure: the view refuses the scene and says why."""
|
|
from orisys_app_shared.scene3d.contracts import PlatformInfo, PlatformLock
|
|
from orisys_studio.scene3d.view import Scene3DView
|
|
from orisys_studio.ui.mesh3d_panel import Mesh3dPanel
|
|
|
|
here = PlatformInfo.here()
|
|
elsewhere = "linux" if here.os_family != "linux" else "windows"
|
|
locked = replace(
|
|
synthetic.poc_scene(),
|
|
platform_lock=PlatformLock(os_family=(elsewhere,), machine=("aarch64",)),
|
|
)
|
|
view = Scene3DView()
|
|
try:
|
|
if not view.available:
|
|
pytest.skip("no GL binding here")
|
|
reported: list = []
|
|
view.diagnosticRaised.connect(reported.append)
|
|
assert view.use_scene(locked, source_id="locked") is False
|
|
assert view.assets is None, "a refused scene must not remain adopted"
|
|
assert any(item.code == "platform_mismatch" for item in reported), reported
|
|
finally:
|
|
view.close()
|
|
|
|
panel = Mesh3dPanel()
|
|
try:
|
|
# The pane shows the reason rather than an empty picture: `platform_mismatch`
|
|
# is one of the terminal diagnostics.
|
|
panel._on_diagnostic(
|
|
__import__(
|
|
"orisys_app_shared.scene3d.contracts", fromlist=["diagnostic"]
|
|
).diagnostic("platform_mismatch", "this package is not released for this OS")
|
|
)
|
|
assert panel.showing_message
|
|
assert "not released" in panel.message.text()
|
|
finally:
|
|
panel.deleteLater()
|