The pre-push gate linted only the dirty tree, so the commits about to be pushed went
unchecked; and every failed overlay projection was sticky, which cost a finger result its
overlay over one bad frame while box results were retried nowhere. gate.ps1 now takes
-LintBase (default origin/main, exit 2 on an unknown ref), the projector declares whether
its own failures are permanent, and serve_stored_view decides before it sets the view.
Verified with gate.ps1 (PASS: 569 studio + 485 shared tests, 632 ui_check checks) and the
two round-2 red samples kept in scratch.
Drop orisys.util.draw_arrows; box live and replay both use
_paint_shared_flow_arrows with sdk_box_policy when no policy is passed.
Recovered box flow uses the same inverse as finger. Verified with
shared/tests/test_image_backend.py arrow/idle/recovered cases.
Stored analysis overlays now use the decoded frame; latch resets and draw failures surface. Verified with bare-video, replay-wiring, visual_policy, and analysis-progress tests.
The row carried the origin, the calibration selection and the SDK's verdict, which a 30 px
line cannot explain; it is now the descriptor's display_name, else the folder name, and the
sensor dialog states the rest under the selector — name and folder, profile, shape, root,
verdict, calibration and every finding — with a suffix only where two rows would otherwise
read alike. Verified with the studio suite, the catalog tests in shared/tests, ui_check and
the lint gate.
Replay left the 3D pane on the rest mesh or a sparse overlay, and Analyze skipped the setup dialog unless the file was re-picked. Live Run no longer starts a chain on a video path. Verified with Studio tests for flush, overlay mask, Analyze open, live-video refusal, and locales.
Box analysis used the finger sample grid, so replay packed arrows into the contact zone. The pass now stores draw_arrows cells; stale box caches miss and re-run. Verified with shared and Studio tests, including a live-vs-replay canvas check.
The picker listed a hard-coded product list and treated any *.json beside sensor.json as a
configuration, so a folder of stray JSON could be offered as a sensor. Discovery now scans the
shipped root and a writable user root beside it, keeps the SDK's verdict for every entry
(listing rejected ones with their reason) and flags duplicate profile_ids instead of shadowing
them; verified by shared/tests and apps/studio/tests.
Opening a recording while the session that recorded it was still live never reached
``stored_result()``, so the panel reported no result over a recording whose result was on
disk. The guard now follows the cache read, results move to the app's derived-data root
(swept at startup, the old in-recording root ignored), and the panel states which of the
four no-result states it is in, with the pass's own reason.
Verified: apps/studio 462/0/18, shared 431/0/1, autocal 358, ui_check 628/0, both gates
clean, real-GL snapshots per state.
A replay could draw arrows but not depth, and the recording view said there was
nothing to draw even when a result existed. Depth is now quantised per frame
(14 B empty, 486 B at the worst frame seen), read from the cache by the same
draw path live uses, and the raw-recording note appears only when no result
exists. Format version 2; see apps/studio/docs/replay-analysis.md.
Replay re-ran the SDK chain on every seek; Part A's pass stores the flow
samples once. Opening a recording now reuses a compatible result or runs the
pass behind a progress/cancel surface, and one cursor with two modes
(recorded CSV, analysed) feeds the charts, the 2D canvas and the 3D pane by
frame id. A threshold, colour or idle-dot change redraws from the stored
frames and writes nothing; a cancelled pass is reported and never played.
Verified: apps/studio/tests 440 items / 0 failed / 18 skipped (15 new, no
existing assertion changed); shared 417 / 0 / 1; autocal 358.
Replay re-ran the SDK chain on every seek: 0.48-0.51 wall-seconds per video
second, about 4.8 minutes for a ten-minute recording. The new
orisys_app_shared.analysis package runs that pass once and stores the flow
samples a replay draws - 4,034 B per frame at the shipped finger grid instead of
the chain's 1,176,000 B; the result contract is in
apps/studio/docs/replay-analysis.md.
Verified: shared/tests 416 passed / 1 skipped (15 new) and apps/studio/tests
unchanged at 425 items / 0 failed / 18 skipped; tools/lint_gate.py clean; a
264-frame pass costs 0.5036 wall-s per video-s against 0.5052 for the bare chain
measured the same day.
The selector now returns candidate locations with an activity flag, so the quiet half of
the finger's sampling grid can be drawn at last: one radius-1 dot per candidate, in the
idle tint and off the flow ramp, on no sample that also carries an arrow. The dots are
`DRAW_IDLE_GRID_DOTS` (on) and `draw_arrow_display(idle_dots=...)`; box and mini keep
their own SDK path.
The selector returned only the arrows it would draw, so a view could not draw
anything at a quiet sample and the below-threshold branch was unreachable. It
now returns every candidate location plus an `active` flag, both callers filter
on it, and the magnitude colour ramp is fixed so one magnitude is one colour
across frames. Verified by pixel parity against HEAD for the 2D canvas and the
3D overlay, and by the shared and studio suites.
The unrolled canvas put the finger's +x where the 3D default view puts screen-left,
and the 3D flow arrows rasterised as 0.23 px hairlines because their stroke was 2 %
of their own sub-millimetre length. The 2D presentation is now the derived half turn
(persisted, set from the plot-settings dialog) and the 3D stroke is one canvas pixel
— the width the 2D canvas draws — verified numerically and with real-GL snapshots.
The default view came from the mesh's own face normal and sat 24.6 degrees off the
design export's frame; re-applying any preset also adopted its baked distance, so the
part overflowed the viewport (measured 2.16 x 2.12 of it). Presets are now the frame's
own views, every preset is reframed through the pane's existing fit, and that fit
projects the model's bounds instead of a bounding sphere. Verified: the frame axes map
to screen up, left and viewer to 1e-6, the model fills 0.60-0.95 of the viewport at two
sizes, and the recompiled package keeps its geometry, domain and source-geometry ids.
The tracker reset was decided by which panel was on screen rather than by the
session, the automatic colour range moved the 3D surface's base colour on the first
press, and the 2D canvas and the 3D overlay applied different flow thresholds (622
arrows against 432 on a real recording). ui_check 600/0; apps/studio 380 items and
shared 390 items with no failures; real-GL 18 items, only the pre-existing
colour-scale failure; AutoCal 358 passed; both views now select identical arrows on
all 42 frames of a real video.
ykcheungab
zhangyijian